you need
  • - regular and Phillips head screwdriver
  • - for certain types of refrigerators in addition wrench №8 and №10
Guide
1
First of all, make sure thatyour refrigerator has an opportunity to reshuffle the door.This is evidenced by plastic plugs for fixing the rotary knob and the loops on the side of the door opposite to that at which they are hung, as well as on the body of the refrigerator.If necessary, additional details provided by the manufacturer, under the interchange doors make them available to complete the device before installation.
2
Unplug the refrigerator, empty shelves on the door and remove them at the time o
f installation.Remove the door handle and set aside.In the presence of the plugs on the bolts securing the door, carefully remove them with a flat screwdriver.Hold the door, remove the attachment from the refrigerator door.Remove the door and gently place it on the floor.
3
Remove the swivel hinge from the door.Remove the plug hole hinges on the opposite side of the door and set them in those holes, which are the mounting bolts before.
4
Then, if in order to outweigh the refrigerator door, the manufacturer provides the same loop, fasten them to the door mirror opposite of their previous position.If the sample used for the opposite other details, refer to the instruction manual.
5
find on the body of the refrigerator plug for mounting swivel hinge on the left side of the refrigerator.Take them out and move in to use this hole to the right.Lift the door side, position it to the refrigerator, and tighten the loop, starting from the top.If necessary, adjust them.
6
Install a new place doorknob.
7
Note: some models of refrigerators after reweighing the door sensor is also required to reinstall the door opening.It also should include the mounting holes on the opposite side of the current position of the sensor.