Tip 1: How to clean the skin from the handle

Often, children playing, leave traces of a ballpoint pen on the leather furniture, or "art pen", while a leather purse itself makes "writing."Remove traces of ink from the skin without damaging the product, it is quite simple, you need only follow a few tips.
Guide
1
Cut a piece of sticky tape (Scotch tape) to the size of the ink stain and stick it firmly pressed to the surface of the product.Then, carefully remove the tape, and the remnants of "erase" a rough rubber band.
2
Take nail polish remover without acetone and apply to a cotton pad.Gently rub the stain and then blot the ink stains and dry the surface of the skin.Attention!Nail polish remover should not contain acetone, otherwise the skin may remain another spot.
3
Dilute 10-percent solution of alcohol and rinse with a trace of a ballpoint pen with a sponge.Cleaned the place, wipe with a sponge and warm water and then dry with a cloth.
4
Try shampoo for leather and suede Colonil, it is usually sold in shoe stores.It
should be used as detergent, washing after use skin surface water.
5
Use a colorless shoe polish Salamandr.First, apply a little cream on a sponge or cotton pad and then gently wipe the stain off.The sponge, which comes complete with a cream, it is best not to use, it has a very coarse fibers and can damage the surface of the skin.
6
Float preparatory spray for removing stains SA8 Solutions.This tool has a fresh citrus scent and perfectly removes traces of sauces, lipstick, sweat, oil and ballpoint pens.Apply the spray on the stain and then wipe off the remains of dirt with a damp sponge.
7
If all of the above ways to show you too hard or did not bring the proper result, try one of the most reliable means of removing ink stains from leather.Apply to the stain cream for hands or face, and wait 2-3 minutes.Then carefully remove the remnants of the cream with clean, dry cotton pad.If necessary, this part of the skin, rinse with warm water.

Tip 2: How to patent leather

In the process of painting the skin there is nothing difficult.However, the difficulty lies in what is a nail and skin products for a pick up.In fact, a bunch of recipes for varnishes, and make out that what suits the beginner just unreal.Fortunately, the professionals on this issue have already figured out and now are eager to share their secrets.
As patent leather
Guide
1
Nail skin should be elastic, dry quickly, and give a good gloss.The most common resins used shellac, Acaroidea and digging.Sandarac garpius and are not used as they are quite fragile.To provide additional flexibility castor oil can be added.You can paint the nail using aniline dyes - eosin, Nigrosine, metanilovoy yellow, brilliant green and others.Here are some specific recipes varnishes.
2
Take 50 g colophony, 100 g of shellac, 100 g of sandarac, 50 g of turpentine, 50 g of turpentine, 1500 g of alcohol and 25 g of lamp black.Mix the filtered alcoholic solution of resin lamp-black, you want to stir it in a small number ve alcohol.Add turpentine, let stand and pour into bottles.This varnish is strong enough.
3
logwood nail skin is made in the following manner.Dissolve 40 g logwood extract 1,200 g of the alcohol, then add dvuhromokalievuyu salt, or rather its aqueous solution.To the resulting dark solution add 80 g of shellac and 400 g turpentine.Next, add 6 g of indigo, and mix thoroughly.You should now have a blue tint varnish.
4
Matt Lacquer skin is made from the following ingredients: 250 g of shellac, 25 g of beeswax, 1000 g of the alcohol 50 g of soap flakes, 25 g of turpentine French 12-13 g of carbon black and 2-3g extract of blue sandalwood.Add to the alcohol solution of shellac wax, chips, turpentine and heat until completely dissolved.Then add sandalwood, then filtered through a gauze structure, stirring it.Then take a little paint and stir it black, then add it to the total weight and again stir.
5
But the recipe clearcoat.Take 150 g of bleached shellac, 1000 g of the alcohol 50 g of soap flakes, 75 g of turpentine and French 37-38 g wax.All these substances are heated under stirring to parallel until a homogeneous mass.
6
can still be used for coating the skin shiny lacquer.To do this, heat 480 g of ethyl alcohol with 20 g of turpentine oil, then slowly add on 80 g of shellac, and then 20 g sandarac (do not forget to constantly stir the mixture).Then Stir an additional 40 g of a thick turpentine.Allow varnish to cool and add a further 10 g of grated black vinegar.Shake before using varnish.
Helpful Hint
Of course, not everyone at home can make a varnish of the above recipes, due to the "remoteness" of certain ingredients.But then he and varnish, so that you can prepare not anywhere, but only equipped for this place.
Sources:
  • than wipe the handle with leather

0
0