Tip 1: How to connect a gas hob

Gas cooking surface at first sight - a very simple device to connect is no big deal, but in fact it turns out that is not so simple.Installation of the gas surface should be performed in compliance with the rules of technical safety, in accordance with the accompanying instructions.When you connect this unit to the gas must be very careful and neat, because the gas leakage can lead to sad consequences.
you need
  • gas hose, two adjustable wrenches, used as fittings and specialty gases preroll.
Guide
1
to connect gas hob necessarily need a special hose, his choice should be given special attention, becausethis will depend on your safety.Hoses are selfonovye (externally look like corrugated metal) and metal braid (yellow risk), you can also buy a special rubber gas hoses (the solid color).The gas hose must be certified (certificate is present at purchase), it is desirable to buy a specialty store.
2
Extract the gas hob, check it for signs of mechanical damage.If all goes well, then u
sing an adjustable wrench, connect the gas hose to the tap, which is mounted in a pipeline (inlet gas valve).To the compound had no leaks, use special gas reeling.
3
Now connect the hose to the gas hob.Note that there may be two outlets - one for connection to the gas cylinder and the other to the pipeline.With the help of the instructions specify how the output you need to use and connect the gas hose.
4
Once you have connected the gas hob to the gas mains, open the inlet gas valve and apply a soapy solution on all connections.If the tape is not observed, it means everything is in order, you can check the work of the panel.Open the burner and wait a few seconds until the air is released, then set fire to it.Test the turn all burners.Place the hob horizontally, on a level that your pots and pans are not dealed with it.

Tip 2: How to connect a gas hob

today to replace cumbersome cookers come compact hobs which perfectly fit into the interior even the smallest kitchen, creating a functional and comfortable working area.
How to connect a gas hob
you need
  • - gas hob;
  • - instructions for installation and operation;
  • - measuring device;
  • - wood saw;
  • - pencil;
  • - sealant;
  • - bracket-tie;
  • - steel hose with a certified seal.
Guide
1
vymeryat size gas hob (usually bundled with cooking surface provides a template that can be used to make propyl worktop, yet these patterns must be checked,After all, no one is immune from error).
2
Select the correct location of the gas hob.Remember to hob must be provided free access of air, and besides, it is impossible that a heated surface splashing water.Considering all these factors, select a location, to the cooking surface at a safe distance from other elements of the kitchen furniture.
3
Draw on the table top cooking surface and contour, using a saw wood, cut along the contour.Experts recommend to retreat from the edge of the contour traced 10-12 millimeters inside.Treat slice moisture-resistant silicone sealant: it protects the countertop from the penetration of water inside it.
4
using special clamps, cable ties fasten the hob to the worktop.
5
The installed connect the hob to the mains (this may require a separate line of the panel provided with the possibility of emergency shutdown) and the gas line.Check if the hob on the type and pressure of gas supplied to your gas manifold.If the performance of the gas pipeline to meet the needs of the cooking surface (you can learn more about them from the operating manual), connect the gas hob to the gas mains using the bight of steel, equipped with a certified seal.
Note
To check the tightness of hose connections, coming from the gas line to the cooking surface, do not use an open flame!The error can cost lives!Check should only soap.
Helpful Hint
Because when you connect the hob should respect the rules of electricity and gas safety, entrust the execution of these works a proven specialist.
Sources:
  • article about installing the hob with his hands.
Note
If the hob combined, ie,except it is connected to the gas electricity for lighting or avtopodzhiga, then move the separate electrical conductor with a gun.

If you want to move a gas stove in another room, it certainly consent by the relevant authorities.
Helpful Hint
Gas hose choose the length of no more than 3 meters, the connection between the hose is not allowed.
Sources:
  • samozastroy.ru
  • how to connect the gas hose

0
0