- - user connection;
- - the necessary tools.
Read carefully the instructions for installing the hob before starting the process of connection.Remember the precautions when dealing with complex appliances.
Before installing the hob, its operating power supply voltage matches the voltage available to the network.To find out, use the technical data table, which is on the bottom surface of the hob.
Disconnect the power supply and connect the cables to their own supply chain.Supply voltage heating elements is 230 VAC.Hob successfully functioning on the AC power voltage of 220
V. The hob must be connected to AC power so that the power to turn off the device there, which opens all poles with a contact separation of at least 3 mm.These devices may include, for example, automatic overcurrent protection device tripping earth leakage or fuse.
cable type H05SS-F (180 ° C) or any other, has a high-performance connection of the hob to the mains.
Submit Your Own connection as described in the technical chart.All connections must be made in accordance with the connection diagram.Connecting cables must be performed in accordance with the regulations.The grounding cable is connected to the ground terminal.Locking screw should be carefully pinch.Cable connections must be securely fastened to the cable clamp and the casing - closed strong pressure (until it clicks).
Remove all labels and protective stickers with hob, to check its readiness for operation, if the surface of ceramic panels.After connecting the hob to the power supply, make sure that all the burners operate.You can check it out on their own, including each of them for a short time at maximum power.Be sure to check up the work of other functions of the product, for example, blocking the panel from the children and the residual heat indicator.
Tip 2: How to connect the hob
To set the cooking surface can cause a master professional who will ensure further safe and correct operation of the device.But if you try, you can set the cooking surface any handyman, thereby saving the family budget.
- heat-resistant adhesive
- Silicone Sealant
Think carefully about the layout of the kitchen.The best option is a location - none of the edge of the hob should not stand tables and cabinets.This is done to ensure good air circulation and avoid the heating cabinet.Thus, to protect themselves from the fire.
If the hob is built into furniture, then you need to prepare the site for installation.Cut a hole in the countertop, which is suitable in size.For some panels to be processed cut veneer heat-resistant adhesive to prevent further damage and deformation.The instructions must indicate the optimal distance between the worktop cut-out and standing next to furniture.Usually it is 5-7 cm.
in kitchen countertops, which can be made of wood or stone, mounted special clamps.For stone they are attached with heat-resistant adhesive, and wood - screws.Inspect the hob.During transport, it could be damaged.Place the hob in the prepared hole.To prevent displacement of the plate on the bottom edge, apply silicone sealant.It will protect the hob from moisture and fix it.
In the scheme of the hob to the mains need to find a connection sequence - "Phase", "zero" and "earth".If the length of the electric wire is missing, then escalate it.Do not connect the hob directly to the power supply.At the end of the wire, set the three-pin plug.Then connect.Use a grounded socket to avoid electric shock.
color electric wires "phase" - brown, "zero" - the blue, "earth" - yellow with black stripe (sometimes black or white).
incorrectly connected the hob may be damaged.
Helpful hints If you have not done anything like that, trust the professionals.
- how to connect the hob