Tip 1: How to update the seam between the tiles

Over time, grout, which fills the distance between tiles, comes into disrepair.It eats dirt, soot, fatty droplets.White seams become an unpleasant shade of yellow, and colored grout loses its brightness.Return a fresh new look to the old tile space in several ways.The outcome will depend on how much effort you are willing to make.
you need
  • - liquid for cleaning the kitchen;
  • - an old toothbrush;
  • - sponge;
  • - rubber spatula;
  • - rasshivatel screwdriver or joints;
  • - dry grout;
  • - finished floating in a tube;
  • - handle with white paint;
  • - suture paint;
  • - brushes;
  • - primer.
Guide
1
Make cosmetic update joints between tiles.To do this, rinse thoroughly mezhplitochny gap.Use the liquid for cleaning the kitchen.Look at the label, it must dissolve fatty dirt.It is very convenient to operate, if the liquid stored in the container with a spray.Sprinkle the tile and seams, take an old toothbrush or sponge to rub the stiff side and grout.Then all the wash water and dry.Cover the seam paint.
2
Use the special marker for joints, if you white grout.Squeezing of white spray paint, promazhte seams.Wipe off excess paint with a sponge.
3
colored grout to apply suture paint.They come in different colors.You can pick up you need coloring.The paint is sold in small jars, is applied to the seam ordinary brush to paint.When the paint dries between tiles, sprinkle it with water from flower sprayer and wipe off the excess with a sponge for washing dishes.
4
use complex, but the most reliable way to update the joints between the tiles - is a complete replacement of the old to the new grout.What is especially important, if you notice in the tile space Mouldy spots.In this case, cosmetics can help upgrade only for a short period of time.The fungus is deep, it must be destroyed.
5
Remove the old grout.This can be done a special tool - rasshivatelem seams.If you do not, use a thin screwdriver.Grind the seam carefully, do not damage the edges of the tile.To complete the processing of the treated joints, you can use an old vacuum cleaner.He will suck the remnants of dust and dirt between the tiles.
6
Prime the fine brush tile space.If necessary, treat with antifungal composition.Allow the surface to dry completely.
7
Spread grout desired color.Rubber spatula rub mass in the joints between the tiles.Immediately remove excess grout with a dry sponge, which falls on the tiles.Try to do everything as clean as possible, otherwise it is difficult to remove the dried grout with ceramic.

Tip 2: How to wipe ceramic tile

After laying ceramic tiles it must be further processed to give the finished covering the whole model view.Processing tiling includes the grouting between the tiles.For grouting, use special formulations and materials.Proper treatment of joints makes it more attractive to all rooms.
How to wipe ceramic tiles
you need
  • - spatula;
  • - grout;
  • - polyurethane or silicone sealant;
  • - sponge;
  • - water;
  • - protective gloves.
Guide
1
Wait after laying tile at least a day.This is required for complete drying of the adhesive composition and stabilization of all the elements of the cover.
2
After drying, clean the joints between the tiles on the adhesive.Check in advance, if the material does not stick to the tile seams so that it is difficult to clean.This is especially important if you choose to embed the colored grout joints.The greatest difficulties are encountered when cleaning the joints when used neemalirovannaya tile, for example, made of stoneware or clinker.
3
cleared joints, fill them with a spatula trowel, which is a special solution.After filling the seam give it shape.If you do not have a special spatula with the required profile, use a scrap of an electric cable or a regular cap of a ballpoint pen.
4
choosing grout, remember that the white color of the solution is not recommended for grout flooring.In general, the color of the grout should be in harmony with the color of the tile.That over time the color seams not changed, soak the grout to use a water-repellent composition.
5
After applying the grout, wait a certain time, which is usually indicated on the package with the composition.After that, the excess solution was removed with a damp sponge.When the composition is completely dry, clean the tiles rigid sponge or gray fabric.
6
In those places where the tile is in contact with a sink, bathtub or toilet, as well as at the junction of wall and floor grout to use silicone or polyurethane sealant.Thus before applying glue to the surface of the tile near the seam masking tape to protect against the harmful effects of the sealing material.After complete curing of the sealant, carefully remove the tape.
Helpful Hint
For local updates seams, you can use the finished grout, which is sold in a tube.Pre remove the old mass between the tiles, prime the surface of the tube and squeeze the new grout.Spend on the new seam wet finger, leveling the surface.Wash off excess with a sponge.Grout in the tube is white only.
Sources:
  • how to clean grout

0
0