- - wire;
- - electric with the instructions;
- - Screwdriver indicator;
- - outlet;
- - plug.
Unpack purchased an electric stove.Carefully read the instructions attached to the unit: it sets out the requirements for the safe connection of electric cookers.Carefully inspect the plate to detect obvious damage and defects.
Check guard.To connect the cooker, opening the cable coming into the apartment should be copper with a minimum size of 6 mm2.Also to be automatic induction (40-50 amperes).However, it must necessarily be provided by tripping the RCD.
Note that electric stoves are sold as a c
able for connecting the unit to the power socket, and without it.In view of this, there are two ways to connect electric cookers: connect directly, ie, without a power outlet, and the use of the power outlet.
If the connection is made directly to the appliance, then get to start on the back panel of the device wiring (there may be three to five).For example, there are found three phase conductors.Data wires connect the phase wire from the panel: black live wire shield connected to the terminal L, blue - to the terminal N, and the yellow-green empty on the ground.
If the appliance connection is performed using a power outlet, it can be two ways to connect the unit.First, install the cable from the appliance, the plug, which would correspond to an existing outlet in the kitchen.But there is a caveat: the fact that the power outlet is still not enough reliable Soviet times, so there is a risk that the power supply is unstable (the reasons are different: the old socket shattered, bad contacts, etc.) that lead to premature failure of the appliance.Second, replace the old power outlet for a new Euro standards, and install the plug on the cable into this outlet.
Tip 2: How to install electric stove
modern electric stove is an effective device for cooking and in many ways superior to the gas stove.It has more functionality, perfect design, it is easier to manage.The efficiency of electric stoves is largely dependent on correct installation.
- Operating Instructions, building level
Choosing electric cookers today is very high.If you wish, you can pick up a narrow plate for small size kitchens.For those who do not want to spend a lot of time cleaning, fit with the surface of the plate glass ceramic material.Glass looks pretty good, does not require applying force when cleaning, excellent conductor of heat.If you usually cook food using a non-standard dishes, buy plate with cast-iron plates.
So, electric cooker selected, purchased and delivered to your apartment.Carefully loosen it from the packaging.Examine the plate in order to identify possible damage.Pay attention to the integrity of the coating, check for scratches and chips.Check the completeness of the product, guided by the attached instruction manual.
Prepare a location for the appliance.Choose a place in the space of the kitchen is necessary to meet the requirements for convenience in the operation of the board.For example, the cutting table and the kitchen sink should be in the vicinity of the electric stove.This saves time and effort in cooking and processing of used dishes.
installed electric should be stable, not loose and does not vibrate.To adjust the position of the plate, there are special built-in elements (legs), which allow to set an electric stove in the horizontal position.If necessary to ensure the horizontality use builder's level.
most important when installing - connection plates to the mains.The connection must be carried out using the appropriate power cord.Use when installing the connection diagram that came with your device.Note that the electric can be one-, two- or three-phase.This feature should also be taken into account when connecting.Each pin and any connection to check for the possibility of a short circuit.
After all the work carried out testing devices that will show the readiness of electric cookers for use.
If you are not confident in their abilities, connecting electric cookers are best left to the professionals.The correct installation of the plate and its competent connection will largely depend on your safety.
- Tips for installing electric cookers
Follow the rules of electrical safety!
If you are not confident in their abilities, use the services of an electrician, who, with knowledge and special tools to quickly and accurately connect electric oven Bosch.
- How to connect their own electric stove
- connection hob bosch