you need
  • - quality detergent;
  • - a special tool for cleaning washing machines;
  • - citric acid;
  • - vinegar;
  • - soda;
  • - filter on the water supply;
  • - Consultation with a specialist to repair washing machines and professional cleaning machines.
Guide
1
rid of the smell in the washing machine helps sometimes a simple change detergents.Buy high-quality laundry detergent in the tested product.If you are a child means, read the instructions, some manufacturers recommend to fill the powder directly into the drum of the laundry and not in
the tray.Soap powders and thick laundry rinses can also cause an unpleasant odor from the cavities cars, as they are not washed away through and becomes a breeding ground for fungi.
2
Add a full dose of detergent in the tray and roll the machine idles in the "boiling" or set the maximum temperature range of 90 degrees, depending on the existing programs of your household appliances.Drain, but do not include the spin.Good to spend some rinses, followed by all available surface must be carefully and properly ventilate the mop washing machine.Often 1-3 such procedures is enough to get rid of unpleasant odors.
3
Buy store household chemicals in antibacterial liquid or specialized descaler for washing machines.Follow the instructions.Typically, detergent is poured into the drum and washing machine scrolls without underwear.Such cleaning should be carried out every six months.
4
use some traditional methods for getting rid of the smell of washing machines.For example, good results are obtained with automatic scrolling empty audio water and a small amount of oxalic or citric acid.The mixed solution was poured into a tray for washing powder and let the washing program runs for at least 30 minutes.
5
If these means of purification machine-gun did not help you, invite a specialist.The cause of the trouble could be bad water with the smell of sewage and competent plumber quickly put you on the desired filter the water supply to the washing machine.In order to eliminate stagnant water (another possible cause of "flavors"), you need to check whether the drain hose is installed.Finally, they may need special cleaning work on the machine: the replacement of PETN and hose cleaning of the filter and the inner surface of the drum.Some craftsmen are doing it yourself.In this mold, the walls detected efficiently removed from an aqueous solution of soda or vinegar.