you need
  • metal corners, wooden beams, sealant, stand or bracket.
Waybill sink you can not fix the cabinets directly to the wall.To do this you need to use special brackets (sold in stores or plumbing departments with furniture accessories).First, you spend the first marking on the desired height from the floor (80 cm).Then, just below the first one, make the second layout - it has to match the thickness of the wall behind the sink - it turns out the line mounting brackets.Then measure the distance between the alleged place of installation bracket to the sink.Then you mark the same distance on the line mounting brackets.Then drill holes in the wall, screw the brackets and fix the sink.
The easiest option - to establish the invoice for a s
pecial pedestal sink (podstole).In this case it is the width should be more podstolya.Ieinvoice you just sink set between the side tables, and her side lay a stone ribs.To this end cabinets under the sink treat silicone sealant, place the sink and press down.After the sealant dries, wash well locks.
Under normal circumstances, invoice sink attached special fasteners (4 pieces) that can go with it bundled or sold separately.Initially screw the screws into the wall of the stone on the inside.Then they Loosely brackets (the angle should be turned to the cabinet).Next, you need a little tweak screws.Then install the sink and slide the screws along the mounting bracket until the screw engages in a recess corner.At the end tighten the mounting surface of the sink to podstolya.
If using standard mounting brackets seems fragile, and the situation will save fixing a sink with wooden bars and seating area.For this you need a wooden rack to put in the box invoice sink.Then fasten the four metal brackets to the rails around the perimeter of a sink and set it on the curb.And then you have to fix the second part of the area with the inside of the walls podstolya.