you need
  • Cement;
  • water;
  • sand;
  • rubble;
  • metal corners.
Guide
1
Prepare the site for construction.If you decide to upgrade the porch, first disassemble the old structure completely.
2
Dig a hole for the foundation.If the soil is sandy, then pour it into the gravel or crushed stone, good tamp.Should get a depth of about 1.2 meters, it all depends on the soil and abundance of water.In the pit, pour sand by 20 cm make the formwork and pour concrete.
3
next step is to make the foundation for the porch.Removed from the surface layer of earth height of 17-21 cm, and the indentations fill up with gravel.Ram rubble and fill it with sand.Fill water only as long as the sand does not completely fill the space between the rubble.
4
Proceed to concreting stages.Formwork mount for each stage.Aft
er the solution will freeze at the first stage, pour sand with gravel into the inner cavity of the porch.
5
Once ready to become the first step, raise the formwork above to make a second, and so on, d.Angles steps reinforce the metal area.Drown them deep into the concrete solution.
6
The pad porch make 5 cm below the level of the door opening.Railings, you can do what you want, depending on your ability.They can be made of metal, wood or brick.
7
steps tiled porch cover, which is designed for outdoor work.Note that the surface of the tile must not be slippery, it can be dangerous.
8
porch to last a long time, do the waterproofing cap.Cover all the porch with a special solution in two layers.