you need
  • - Construction knife;
  • - adhesive plaster.
  • - pencil;
  • - Roulette;
  • - miter box;
  • - spatula;
  • - silicone sealant;
  • - fine sandpaper
Guide
1
Place two ceiling plinth in the corner so that their broad sides touching.Make a mark on one another and the baseboard, at their touch, with a pencil.
2
Place the plinth on a flat surface.Draw a line connecting the previously made mark and the opposite corner of the fillet.Carefully cut the plinth of the line drawn with a sharp knife construction.
3
Apply the fillet in the corner, putting each other.If necessary, adjust end surface fillets with a knife and process fine sandpaper.
4
Apply a thin strip of adhesive on the surface of the plinth adjacent to the
wall or ceiling, and its end portion.Allow the glue to soak for 1-2 minutes.
5
Glue fillet.Remove excess glue with a spatula.Carefully seal the gap formed at the junction of fillets, using silicone sealant.
6
If the walls and ceiling in your home smoothly, to cut moldings at an angle of 45 degrees, you can use a special tool - miter box.Put the fillet into the groove of the tool and cut at the required angle, using the slots.Cut the fillet second mirror, at the same angle.
7
Perhaps the most simple and, because of this, a popular way of gluing ceiling moldings in the corners of the room is to use special angular elements.In this version you will be spared from having to stitch fillet.If the chosen model ceiling moldings corner elements are not provided - use universal "corners."