you need
  • - Plastic garbage bags;
  • - nylon filament / Christmas "rain" / synthetic rope / natural or artificial raffia;
  • - scissors;
  • - Stapler / glue.
Take a large plastic garbage bag with drawstrings.It is advisable to buy bags of green or white, to skirt was more like a traditional skirt hula dancers.
Apply this package to the figure at slightly below the waist and mark the desired length skirts - a little below the knee
or ankle.Cut off the excess length of the bag of garbage.
Cut package into many bands as possible bottlenecks.Use scissors to cut the ties to the package.Be careful not to accidentally cut Drawstring with strings.
turned to skirt a lush, cut the same way a couple of garbage bags and attach them to the first bag stapler so that the metal braces were not too noticeable.Put on a makeshift skirt and tie it at the waist or hips.
Likewise, you can construct a skirt from other scrap materials: Christmas tree "rain" unwound synthetic ropes, nylon fiber, inexpensive yarn.If funds permit, you can use traditional natural raffia.
Cut thick broad band for the base skirt, which you will attach the thread.Its length is equal to the circumference of the waist, plus 10-15 cm at the clasp and smell.Of the above materials, or other fibers, like them, many strands cut whose length is twice the length of the skirt in finished form.Gently fold the strands together.
Take a small bunch of yarn and fold it in half.Threads or stapler attach the beam to the bend in the tape-base closer to its bottom.Just attach all the other threads.The skirt may be a transparent, single-layer and lush, with tightly adjacent to each other in several layers of yarns.Sew two buttons or hooks on the waist skirt.
You can make a skirt out of crepe paper cut into it into strips that are tied to the satin ribbon (waist circumference plus the gain on the strings - 25 cm).Paper strips can also be glued to the tape-based or a stapler to attach.