If you bought low-cost consumer camera, the so-called "soap-box, pay attention to its packaging.Perhaps belt already fastened to the body or stored in the box together with other equipment supplied.This camera is small in size and are usually attached to a small belt, whereby the device can be hung on the wrist.The strap may be embedded in or attached to a camera mounting on a small enclosure as in a cellular telephone.
You semiprofessional or professional camera, for example, Canon 1000D, Canon 550D, Canon 7D, Nikon D90, and so on. D. Mechanical structure of buildings such devices similar to each other, even in terms of mounting optics and especiallymore in terms of belt anchorages.On top of the shell symmetrically with respect to an optical viewfinder sides are t
wo small fixing belt.Rather, belts for such devices you will have to buy separately.The belt may be designed to carry the camera over your shoulder or wrist, but will be fixed the same way, regardless of the type.
from both ends at the belt has a thin dense tape.They need to stick to the mounting holes, which are mentioned above paragraph.Secure and adjust the length as your convenience.Securely fasten the belt, provided that the device will be loose, it can fall, be damaged while the internal optics and mechanics or electronics.If you find it difficult to find the mounting enclosure, refer to the user manual.
Tip 2: How to attach the strap
Acoustic guitar - is one of the most popular musical instruments in the world, and perhaps the most common.Having bought a guitar and learning to play on it, you will eventually discover new techniques and methods.And when behold concert of your favorite band, so you and all may want to try their hand at the game standing with a strap over his shoulder.In this there is nothing wrong, so you should get belt and try.
To fix the strap you need an extra button like the one that is in the end.Buttons so you can buy at any music store.You can certainly use the "socket", but this method is not universal, because for its implementation requires a special strap.We recommend to stay on the first version.
In the center of the guitar neck heel on the inner side of it, drill a hole in the direction perpendicular to the strings.The diameter of the screw holes - 1 to 1.5 mm depth - from 10 to 12 mm.Screws attached to the purchased or buttons, or it must be chosen so that it went into the hole on the button and not sticking out of it.
From a thin old mediator (preferably metal) cut the puck under the button and proceed in the washer for the screw holes using a round needle files.If the goals you have decided to use a metal pick, needle files here can not do.We'll have to drill a hole with an electric drill, and then process the edges with sandpaper or the same needle files.
Screw the screw until the lock by inserting it into the pre button.Then make a quarter turn in the opposite direction.It is necessary to ensure that the button is slightly scrolled.If the hole was drilled right diameter, the button will scroll while the screw is at a standstill.If you have not guessed a little hole diameter, laminate toothpick or a match and put the splinter in the hole, and drip a little to PVA.You can also twist the screw, dipped it in the same glue - so it will be more reliable.
Here are two main options for strap: Screw a stud in the middle of the right side.While the stud is already available on most new guitars.But on old instruments, he is rare.From one end of the strap, you will see a slot designed specifically for this stud.On the other end of the string is to link to the tool head, adds another stud which is screwed into the heel of the guitar fretboard.In this case, fit the strap having at both ends of the slots under the same studs.