Tip 1: How to sew a patch on the form

Patch is a mark of distinction in the military and organized structures.Initially, it was about tattoos, then in the Middle Ages began to use patches, chevrons, which served as the designation accessories service.At the same time the military is constantly faced with the correct chevron stripes on the form.
you need
  • stripes, needles, thread, pins, ruler.
Guide
1
Before you start to sew a patch on his tunic, it should be remembered that all patches are of different shapes and sizes.In addition, the chevron can be attached to various places.Special regulations may specify the order of chevron stripes.
2
Chevron "Russian Ministry of Internal Affairs" of regulations should be sewn on the left sleeve uniforms.Chevron should be placed at a distance of 8 cm from the seam at the shoulder or the bend to the most top of the stripe.
3
Stripes indicating belonging to different services and departments should be sewn on the right sleeve of the pocket center, located on the sleeve.The ru
le applies to summer and winter form.On the other types of chevron shape is sewn on the right sleeve indented 8cm from the top seam to the top of the chevron.
4
Exchange stripe cadets of educational institutions MIA are rectangular and sewn on the left sleeve, retreating 20 cm from the top seam to the top of the patch.
5
First, measure the distance from the top of the seam and the sleeve patch is placed at a specified distance and the upper edge of the fixed pin.
6
lower edge to be sewn in such a way that when the drooping arm badge located on the sleeve to go vertical.Prick the bottom edge of pin stripes.
7
small stitches sewn on the inside contour of the chevron.This patch should fit snugly inside the hose.

Tip 2: How to sew patches

Textile patches are not only mark of distinction in the various organizations, associations and military structures, but also very popular among bikers in America and Europe.They can be sewn on clothes, hats, jackets, or even easier to stick with the help of iron, thus giving its image a certain individuality.
How to sew patches
you need
  • - stripe;
  • - needle and thread;
  • - sewing machine;
  • - pins;
  • - chalk or soap.
Guide
1
manually.If the product to which the patch is sewn, has lining, at the time of sewing the lining or rebuff her tack stitches.Cut off the excess from the stripe, but to remain around 5-10 mm visible part.If you trim the butt to the stripe, it can be dismissed.
2
Fold the edge of the patch flush and press a warm iron.The basis can cut corners on.Patch should look like it has sewn.Do not use a hot iron.Typically, patches made of synthetic material and in contact with a hot iron may be melted.
3
Apply patch to the product, secure it with pins and then baste white thread.After a try on a jacket with stripe stoned to it and make sure the patch is sewn in the right place smoothly.Later, it is simply impossible to align the curves or change its position.
4
Sew completely: small stitches obsheyte stripe around the edge.After this wet patch of water and once again progladte warm iron to evaporate water - patch becomes like a glove.
5
Polumashinny method.Cut the patch as well as in the previous method, and attach to the place at which it want to sew.Soap or chalk, mark the beginning and end of the laying machine stitching.Stitched part of the stripe reverse side.Fold the stitched part of the stripe around the machine line and more dosheyte hands.In this way, the sewing machine will be completely invisible seam.
6
machine.Cut the patch as in the first method.Fold the edges, but not right next to the useful part of the stripe and leave 1-2 mm.Sew badge for suture-millimeter left zigzag, so that does not cover the useful space stripe.Otparte patch iron.For sewing can use normal longitudinal line, although this line does not prevent the fraying edges of the patch, as opposed to joint-zigzag.
Note
If the sewing fabric puckers or is not proved to be a chevron is centered sleeves and vertically, it is necessary to alter it.
Helpful Hint
Choose a color of thread that matches the color of fabric.
Sources:
  • How to sew Patches on the police uniform
  • distance from the shoulder to the chevron

0
0