you need
  • - gloves;
  • - Building mixer;
  • - bucket;
  • - Kohler;
  • - water.
Guide
1
Choose latex paint

Water-based paints are used for interior and exterior finishing.This type of paint is suitable for application to almost any surface.Latex paints consist of binder and pigments.There are several major subtypes of this type of paint.

Polivinilacetate paints made on the basis of PVA glue, and are probably the most affordable.However, this subspecies with water-based coatings is the least stable and, moreover, is not very wide color palette.

Silicate paints are water-glass solution into which is added a special pigment.This resistant coating used for interior decoration, as well as for outdoor use.The only drawback of silicate p
aints is their low water repellency.The composition of these inks include alkali, which in contact with the skin or mucous membranes may cause severe inflammation.Therefore, it is necessary to work with them in special costumes.

Silicone paints are made on the basis of silicone resins, which are mixed with water.This kind of coverage is considered one of the most modern.

Acrylic paints are based on acrylic resins that give cover additional elasticity and strength.The surface with acrylic coating will have increased moisture and wear.Acrylic paints are the most expensive in the entire range of water-based paints.

Latex paint is the most popular water-dispersion coatings.Surfaces coated with such paints can be washed frequently.Additionally, latex paints can protect the wall from small mechanical damages.Latex paint applied in two layers, can close the crack width of 1 mm.
2
active pigments that make up the water-dispersion paints are associated with using the elements of water.Therefore, dilution of the thickened paint type also uses drinking water.

Take a clean bucket.Carefully pour the paint from the can.Gradually, pouring water and the paint stirring continuously with the help of the construction of the mixer, bring its members to the desired consistency.

If necessary, give the right color paint, using a special color scheme.To do this, take a shallow container and mix it with a little color scheme latex paint.Gradually pour the mixture into the base paint bucket with continuous stirring.Achieve the desired shade.
3
Apply water-based paints can be using a special roller or brush.The coating should be applied in 2-3 layers, with each subsequent coat is applied only after complete drying of the previous one.