Tip 1: How to make vinyl stickers

Creative people love creative solutions.Vinyl stickers - stickers - this is probably the fastest way to revive podnadoevshy interior or give your car an unforgettable view.They are made in hard copy, striking figure on the high quality vinyl.This picture can be purchased in shops or stores for interior design.Vinyl stickers are lower adhesive layer, so they stick to the smooth surface of the wall or a car is not difficult.
Guide
1
Some fans prefer to design your own vinyl stickers.This requires a special film, computer, pencil and lineyka.Sozdayte original drawing on a computer, process it into a vector program Corel.Figure should be simple but expressive.Better if it will be monotonous.
2
Buy in stationery store or the store building materials company film Oracal or Avery (if you do not find in the store, order online!) Of the desired color.
3
Spread your chosen film on the surface of the table or on the floor with the glossy side down.Using a pencil and ruler to move the film
image you created.This will greatly help in the centimeter squares lined with the reverse side of the film!
4
Carefully cut with scissors along the contour drawing.Turn it the glossy side up, and mount it on the mounting adhesive tape.So it will be easier to stick drawing on the selected surface.
5
Use a dry cloth or soft brush to clean the dust from the surface to paste over.Schedule a pencil sticking sticker.
6
Attach the sticker on the reverse side of the marked place and fasten the mounting strip of adhesive tape to keep it from moving.Carefully remove the film lined portion of the substrate, and the film itself stick to the surface, carefully smoothing it flat object (credit card, squeegee, wide plastic spatula).Little by little, piece by piece, remove the entire substrate, pasting the same time sticker.
7
After gluing the whole picture again flatten it squeegee to expel any air bubbles and stick sticker is perfect!

Tip 2: How to make a label for a disc

Sometimes you want to give a more aesthetic appearance of the storage medium, for example, if you collect video collection and photo library.You can also make a festive print, and the disc takes the form of quite decent gift.This procedure can be done at home using very simple devices.
How to make a label for a disc
Guide
1
Type the desired pattern on a special photo paper for the production of labels.But this method has a lot of negative reviews, because if not accurately place a sticker on the surface of the disc, can break and the disc itself and the drive.Stickers can also asymmetric unbalance disk, which can lead to problems when information is read, and damage to the disc.
2
get yourself a DVD-RW with the possibility of LightScribe.With this feature, you can burn CDs on special black and white picture.Should he not much more expensive than a conventional drive, but is also an ideal solution.Suitable for undemanding users, because the pictures out of mediocre quality.
3
create mailing labels using the program Nero.To do this, run the program, go to the "Extras" and click on "Make a sticker or label."Then select from the list of templates, edit it on your own and save.Insert the disk that you want to label and press "Record".If your drive supports recording labels, the recording starts.
4
Print a label with a special photo printer that supports a similar function.To send a sticker printing, create and save using the program Nero, as described above.
5
photocenter Take advantage of the service if you do not have the necessary equipment.Today almost all the centers and printers can meet such requests.
6
However, if you do decide to make their own stickers, carefully read the composition of the paint, so it does not impact on the disc itself and not spoil it.Also, some adhesives may adversely affect the protective lacquer coating of your disk (such substances is usually made on the basis of solvents, which attack the varnish).
Sources:
  • program labels to discs
Sources:
  • how to make an album for the label

0
0