Of course, it is better to ask for help in a special workshop, but if you want to save or if you do not have time attributed to the master clock, repairs can be done independently.
First you need to find out from which is made of metal bracelet.If the metal is soft, you can use ordinary pliers.To do this, hold the tool unnecessary link, straighten it and remove it.Before you fasten the bracelet, it is best to make sure that you remove a sufficient number of units.To do this, attach the strap to the hand and somknite it.Do not hang out?Then just need to straighten the two closest to each other in the gap and link them together in a chain.We have to work very carefully, especially if the metal is covered with a layer of coloring (may be left scratching).If the
metal is more durable, to bond the bracelet, you can use a soldering iron.
There are watches with bracelets is not a chain, but in the form of a flat strip of relief.Such links are fixed together with small nails, usually on the right side.To remove the excess link gently pull studs with a needle or awl.After that, try on a bracelet, and seal the adjacent particles on the same principle.
If your watch is made of precious metal, if you are not a professional, it is better to refer to the workshop.Repairs of this kind is no more than 200 rubles, and when you make mistakes could multiply the price doubled or even triple.
Tip 2: How to remove a link bracelet
Clock - an important subject in today's transient life, full of events which follow each other very quickly.Therefore, buying a watch is obligatory for many.Buying a watch, sometimes you may find that bracelet on them is not quite the right size.If it's small, you do not buy this watch, and if it is too big, need to indulge in buying there.You can ask to adjust the bracelet here or watch shop.But it is possible to do it yourself.
One way - remove unnecessary links bracelet.If the bracelet links are connected by a pin type, you will need the following tools: awl holder, pliers and a hammer.Secure the bracelet holder.Using an awl, push the connecting pin link bracelet.If the pin can not be right, gently help her gavel.Pull out the pin with pliers and remove the detached portion of the bracelet.Once you have removed the required number of links connected by pins break.
To remove the links from the bracelet, where they are joined by a sheet type, you will need the following tools: pliers or tweezers.Using tweezers, push aside the sheet connector link.Then pull it out using pliers.Unplug unnecessary links and inserting the connector in place, gather bracelet.
To remove unnecessary links in the bracelet , where they are joined by zamochkovomu type, you will need to calibrate the instrument.Remove the connecting bracket with a padlock.Hold the band with both hands close to the locks that you have just disconnected, press down on the part of the band up and down and you feel like the links are disconnected.Continue to gently press down on the units, turning them at the same time towards in order to completely disconnect the lock.Once you have weakened the attachment mechanism, pull the band down to parse links.Gently dissolve the detached links in the side.Assemble in reverse order.
All operations for dismantling and assembling units perform slowly, gently.It is a necessary rule in order to post your attempts to adjust the length of the band did not have to throw away.The materials used to make bracelets, usually quite strong, but very picky connecting elements, as in the manufacture of bracelets is not expected that they will be removed.
Dispose taken out link is not necessary, especially if the clock is expensive.In case of breaking the bracelet links and the loss of it will be so helpful.Before working on the table is better to put a white piece of paper so that all the details were clearly visible.