you need
  • You will need:
  • - tulle, organza or tulle;
  • - scissors;
  • - thread;
  • - a sewing machine or a needle;
  • - barrette or comb attachment to the veil hair;
  • - rhinestones, lace, satin ribbon, beads.
Before you start sewing the veil, you will need to decide on its appearance.One important parameter is the length veils.The most popular options are: shoulder-length veil (60cm) to the elbow (75-80sm) to toe (110cm) and a veil with a long train (more than 2 meters).In addition, you must decide how lush and thick you want to see your veil: please note that if the veil will cover the face before the first kiss, it is better to give up many
folds in it, to the photographs could be seen the bride's face, not white cloud fabric.If the veil should fall on the shoulders and back, it can be as lush.
determine in advance how you are treated region veils.Perhaps it is trimmed with satin or lace inlay and sew the elastic tape with sequins or pearls.Consider also whether to supplement the veil decorations - small embroidery or beads.Decor and decoration should be in harmony veil wedding dress or ornaments the bride.
When you have decided on the model and sketch a rough sketch, you can proceed to the removal of Merauke and cutting tissue.Most often, when you create a veil as a pattern using oval or rectangle with rounded edges, and sometimes - a square.
As for the size of a veil, the length must be measured from the head to the place where the veil must end, get double the result.The width of the veil depends on its presumed thickness, but in any case, be not less than 180cm.
Lay the cloth on a large table or on the floor.Fold it in half lengthwise, and then once again have the transverse line.You now have four-layer fabric rectangle.Take scissors and round off a free corner of the fabric, these layers are fastened to each other and indicating the cut line.When you expand the material, you will find that you end up with a rectangle with rounded edges.
Now you need to give the veil form.To do this, fold the fabric across the middle or take one end of the fabric a little bit longer than the other, to give the kind of multi-layered veil.Try veil and attach it to the head, if it is longer than you would like it cut too much, making the rounded edge of the cut.
next step - assembling veils.You need a needle and thread to gather the fabric along the fold in numerous folds.If you sew a thick veil, the fabric is gathered across the entire width.If you are planning to make a veil nepyshnoy, gather on a thread only the middle part of the fabric along the fold.As a result, you should get a piece of tissue collected approximately 5cm long.
Sew veil to barrettes or ridge, through which it will be attached to the hair.Also it can be used as a mounting ring or tiara.Now you can try the product and move on to decorating veils and testing the lower edge.
sewn trim to the bottom edge of veils and decorative elements can be both manually and on the sewing machine.To do this, use the thin thread and try to do the work as carefully and thoroughly.
Your veil is ready.Maybe now it is not just wedding accessories, and a future family heirloom you can pass someday her daughter or daughter in law.