Tip 1: How to put a fishing net

It would be easy, network threw into the pond and take out a couple of hours plentiful catch.But not all so simple.Fishing network yu has a lot of features not taken into account that just can not be.Much depends on the correct landing net.
Guide
1
Planting Network is a network linking the web to the cord.It can be done manually by the shuttle, and when the knitting machine network - automatically.The bottom line is called the truck and it must be greater than the upper.For example, when the length of the network of 60 meters length of the lower cord will be 33 meters, and the top - 27 meters.There is an option when on the contrary the upper cord longer than lower.In this case, the upper part has a little tension, which makes network more catching capacity.This method of planting in the northern waters of common Bothnia.
2
One of the most popular ways of planting the network - via milestones.Milestone - a special line that is used as an adjuvant.At the ends make nicks, with the dis
tance between nodes.To become a milestone universal fit for networks with different cells, it stick a few tapes with different values.But usually experienced knitters networks do not need it.
3
The simplest landing for networks with large cell is threading the cord through the cells.Required element landing - node.Of the variety of nodes, select the double knot, it is very popular among fishermen and is used especially when landing nets.
4
In networks connected by hand, use a landing "on the run".Its main advantage - the lack of reinforcement units that allows the network to move the canvas by landing string.This makes landing network mobile and more catching capacity.
5
drift landing received its name from the network of the same name.There landing string you need to fix the selection of the simple planting unit.Thread extending from the unit at a distance of 3 to 4 strokes, obveyte around the bitter end, and then at a fixed length of slack in both the thread tie the knot.Landing a string as it is twisted by half.For greater stiffness of the whole structure can be used meshes.

Tip 2: How to make a fishing net

Good fishing tackle - half the success angler.In addition to fishing rods and spinning rods, as functional gear has long been proven to fishing nets.You can either order network or buy it in the specialty store and make your own.The latter option is more time-consuming and requires more time, but eventually you will get high quality network , that exactly will meet all your requirements.
How to make a fishing net
Guide
1
to weave networks, prepare common sewing thread of different thickness and different colors.Also, you need to factory twisted nylon thread and veins of different cross sections.Threads do not need to spin up, so as not to spoil the shape of the cell network.The thinner and more durable nylon thread will you choose, the more accurate and stronger will network .Threads must be well endure a long stay in the water.
2
You also need special tools for weaving - the canoe and shablonka.The shuttle fabricate from any dense material (wood, metal or plastic).If you knit thin threads, make a small hook width of 2 cm and a length of 15-20 cm. Shablonka - is a rectangular plate, which regulates cell size.It has a length of 10-15 cm and a width of the plate should match the width of the cells - 30, 40 or 50 mm.
3
There are many types of network nodes, and the simplest of these is the single node.Throw Nylon thread length of 10-20 m on a small hook and make a loop at the end of the thread.Firmly tie a knot.
4
Beat any stationary surface such as a wall, a simple nail.He should be at your eye level (if you are in a sitting position).Tied at the end of the thread loop throw with a nail and tie the knot.
5
On one side of the nail to hang a loop, and on the other will descend monofilament thread that goes to your shuttle.Take the shuttle to the right hand and the left hand holds a plate-shablonku.On shablonku lay the thread extending from the nail to the shuttle, and then lower down behind shablonki shuttle so that the thread leaned over its rear end.Enter the tip of the hook in the loop from the bottom up, and drag it through the loop.
6
Pull the shuttle back on itself, pulling the noose gradually to the front edge shablonki.Thus, you will notice that during weaving the thread is placed on three shablonku - top, bottom, and then on top of the loop to the hook.After the thread lies on shablonku the third time, push her left thumb, creating a second loop around shablonki.
7
Tie it to the first loop, throwing the thread extending from shablonki, circular motion of his right hand out from under the thumb on the first loop to the shuttle.The thread must lie in a semicircle from left to right.Lower the hook on the right edge of the first loop down, skip the tip from the bottom up between the left thread of the first loop and the start of the second loop.
8
Pull the hook and pull it back, holding shablonku fingers of his left hand.Pull the thread back until thrown over before the first loop, the thread will come out and will be delayed until the node between the thumb and forefinger of his left hand.
9
Firmly tighten the knot, then reset to shablonki second loop from left to right and tie a third loop.Continue to knit network , dropping each subsequent loop.
Sources:
  • landing fishing nets

0
0