Tip 1: How to sew a skirt

Sacrament sew skirts explained more, probably, as a child in the classroom work, but eventually this knowledge completely erased from the memory.And just when he wants to try to make it the most, understand that completely forgotten all wisdom.

So the first thing to sew a skirt properly, you need to take your measurements and make a pattern.

In mass production know how to sew a skirt on measurements of typical figures, but for the individual patterns should pay careful attention to the measurement of all necessary quantities.Better to take measurements over a laundry.Classical measurements - is putting the waist and hips.All measurements poluobёmov and width accounted for half the amount, length - in full.It should also take into account the differences of your figure from the standard, for example, protruding abdomen or thighs steep.In this case, you must also measure the desired length of the skirt to the floor in the front, side and rear.Do not forget to increase the free customized fit!If you w

ant full skirt, then, we need the corresponding tissue.

Determine the desired length of the skirt - Pencils - stand in front of the mirror in shoes that are going to wear a skirt to the future, and attach a piece of fabric to the hips.Move it up and down to determine the optimal length, the most suitable to you.

main model for the construction of drawing a straight skirt is its double-seam option.It is suitable for women of any age, and sew it can be almost any type of tissue.If the fabric is not monotonous, and ornamental or pattern, think about how to appropriately adjust it at the cutting.If you sew a skirt, without extending it to the bottom, in the finished form, it would seem narrower.This skirt will look best on women with high hips.

important processes in the preparation of the fabric to the cutting - its dekatirovka.Dekatirovka - a processing fabric for its shrinkage.Earlier dekatirovku made by wrapping a wet towel-cut is, but with the advent of irons with controlled temperature and humidity become possible to treat the fabric with steam.Dekatirovku performed for fabrics containing natural fibers more than 50%.For natural fibers include wool, silk, linen, cotton and others.Before purchasing a fabric to find out its structure in order to understand whether you need to carry out dekatirovku.

After tissue processing and preparing patterns can start to work.Think about how your future will be fastened skirt - on buttons, hooks and zipper.Remember, the decorative elements can both ruin and decorate the product.

Tip 2: How to sew satin

Atlas - factory material used for the production of shiny, smooth and delicate fabrics.Because it already makes wedding dresses and linens.Due to the fact that this fabric is easy to break, it is important to implement the recommendations making things out of satin.
How to sew satin
you need
  • - Atlasova tissue;
  • - the spokes;
  • - thread;
  • - paper;
  • - table;
  • - chalk / pen.
Select the appropriate type of satin for your work, because this material has different characteristics and quality.If you are just starting out, you'll like acetate satin, as it is quite cheap and is an excellent material for teaching sewing.But if you need to do more serious work, such as a wedding dress, you will need a more expensive type of tissue, namely polyester satin or silk.This is the best material for this kind of tailoring things.
Choose from bright or dull side of the fabric, the one you want to see on the right side or the - will be prominent on the side.Next, make all measurements with the help of tailor chalk or gel pen on the reverse side of the fabric, as it is very difficult to completely clean up traces of the markings on the surface of the atlas.
Pull your fabric and attach it to the paper surface so that you can work with slippery material.Do your best to keep the edge of the fabric according to the edges of the table.Also make sure you are not pressed for a few hanging fabric as the fabric folds with Atlasova extremely difficult (and sometimes impossible) to remove.
Use a muslin cloth or another as a substitute for accurate clothing sizes.This is to ensure that you do not have to make changes in harvested Atlasova tissue that gets dirty.During sewing, knitting go at the seams and hem fabric, so as not to warp the surface satin sewing tools, traces of which will be very visible on the shiny surface of the product.
Make imprint stitches after crosslinking, to unite ties.After prozhmite and open seams.In both cases, use prozhima technique that you used in the procurement of the atlas.This is in order to prevent damage to already finished product with which you are working.
Treat Atlasova cloth carefully.
Helpful Hint
Advise in the studio, what kind of fabric Atlasova you better use for tailoring of a thing.
Double-seam sewing skirt
Related article
double-seam sewing skirt