If you use a video camera that records video on built-in hard disk (HDD) or a memory card (Flash card), follow these steps.Connect the camera to the computer from using the appropriate cable USB.Its first end is connected to the connector on the camcorder itself, and the second - to the connector USB and computer.Then press the power button.If necessary, select the connection mode corresponding to the transfer (copying) data.
system will automatically detect the new device.Using Windows Explorer, open "My computer », and then navigate to the folder connected camcorder (if it uses, and the hard drive and memory card, you can display two devices).Find the relevant video files, select them, right-click and select "Copy."Next, open the folder on your computer hard drive and where you are going to copy the
video from the camera, right-click and select "Paste".Wait for the copy process.
When recording video using a memory card, you can proceed as follows.Turn off the camera and remove it from the memory card.Insert it into the card reader and computer and open the appropriate directory using Windows Explorer operating system.Find the desired video, and then copy them to a folder on your hard drive.
If you use a video camera that records video on the tape (MiniDV, HDV), follow these steps.Connect the camera to the computer from using the DV-cable.One end connect to the camera itself, and the other to the connector IEEE1394 and computer.Run the program to import the video (for example, Windows Movie Maker).Turn on import video from the camera, set the desired video quality settings, where to save disk space and run the backup process by pressing the appropriate button.
Tip 2: How to copy from the camera to the computer
process of copying photos and videos to the computer is the same for almost all camera models.You will need a USB cable, the camera directly and the computer itself, and possibly drivers to the camera.The procedure itself is nothing complicated in itself is not.
- - computer;
- - camera;
- - usb cord;
- - driver.
Make sure your computer are the correct drivers.Drive them comes with the camera.Plug it into your computer and follow the installation instructions.Determine whether the cost of drivers is very simple: connect the camera to a computer via a USB cord.Usually there is a single camera format connector cord to buy is not difficult in any store with the appropriate equipment.Once the camera is connected (turned on), check whether it recognizes your computer.If not - it is likely drivers are not installed.
If the computer gives a dialog box that he sees the camera.In the dialog box, scroll to "Open."A list of files - this video and photos taken by the camera.Now all actions are similar to copying from one drive to another computer.To see exactly which photos you copy, right-click the folder with the files of the camera.Select "Browse" and "Icons" or "Enlarged icons."
Select the files.To select all contents, press and hold the CTRL key and simultaneously drag the mouse from the upper corner of the folder down, after clicking on the left mouse button.When the files are selected, click on the right mouse button.Select "Copy."Now create a folder on your computer where you wish to store pictures or videos.Go to this folder.Right-click on an empty spot in the folder, and click "Paste."The files are copied successfully.
Note that while copying may be long enough, but for the correct operation to interrupt the file is not recommended.Also, try to connect the camera to a computer with enough charge that it does not shut down in the middle of the process.If the computer does not recognize the camera hard - try to plug the power cord into another USB port on the computer.