Tip 1: How to connect two TVs to one antenna

If the house has two TV and one TV signal source, then to connect, in addition to cable, additional materials.This manual will help connect two TV to one antenna using a special device - a signal distributor.
you need
  • RF-coaxial cable splitter
Guide
1
Acquire RF-coaxial cable.Given that TVs are likely to be located in different rooms need a cable longer than 10 meters.Also buy a splitter (splitter).This gilded device which has a single coaxial port on one end and two (or three) - on the other.
2
Take the necessary precautions, since the installation of the antenna and the laying of the cable in the home may be associated with health risks.
3
Select a place to install the antenna and install it.The higher it is placed, the better the reception.
4
Connect the antenna and the splitter via the RF-coaxial cable.To connect using a single input port at one end of the splitter.
5
connect the TV using the outgoing ports on the other (free) end of the splitter.
6
Secure the cables so as not to damage or step on them.Use electrical tape to secure the cable.
7
Turn on the TV to check the connection to each of them.If one has a bad TV reception, make sure the cable is not damaged and securely fastened.
8
Buy a second splitter if your TV is bigger than the available ports on the first splitter.Connect the two together by joining the splitter cable to one of the ports on the first and the only inbound ports on the second.Hubs can reduce the strength of the signal transmitted.If a single antenna to connect, for example, four TV , distribution amplifiers required to improve image quality.

Tip 2: How to connect a second TV

It so happens that there is a need for TV in every room, to everyone the opportunity to watch is your favorite movie or transmission.There is a simple way to solve the problem of connecting a second TV.
How to connect a second TV
you need
  • second TV
  • TV cable
  • antenna splitter
  • antenna plug
  • Measuring tape
Guide
1
Measure measuring tape measure distancethe place of branching of cable television to the place of installation of the first and then the second set.
Yardstick
2
Measure and cut two antenna cables required length.
Cable TV
3
Replace the old antenna plug on the end of the television cable, from which the broadcast television signal, a new one.
Antenna plug
4
Connect the plug on to the ends of the antenna cable going to the TV first.To do the same job with the cable running to the second TV.
5
Insert the main TV cable in single slot antenna splitter.
6
end of the antenna cable for the first and second respectively in the TV insert the other two connectors.
7
Connect the free ends of the antenna cable to the TV
Sources:
  • connect two televisions

0
0