Unplug the TV from the mains and wait until the PTC (so-called thermistor with a positive thermal coefficient of resistance) in the circuit loop demagnetization cools.This may take up to half an hour.Then plug it back in.There will be an automatic demagnetization.If it does not work, repeat the procedure several times.
The monitor is usually a relay which disables the PTC and the coil from the network after it carried out demagnetization.Therefore, it cools even when the monitor is on.To demagnetize the picture tube again, just select the menu item called Monitor Degauss.Remember that re successfully mask demagnetize the tube can only be half an hour (until PTC hot in selecting the appropriate menu item relays will click, but degaussing will not be performed, in addition, every such attempt to re-warm u
p PTC).
If the picture tube is magnetized so much that he built demagnetize the loop fails, use an external inductor demagnetization.Take it for a while in teleatele.Remove from the room at the time of any floppy disks, audio and video tapes, bank and discount cards, tickets with magnetic stripe - all that can be demagnetized with your TV or monitor.Turn on the TV or monitor, put the throttle a few meters away from him, and then are also included.Slightly moving the choke from side to side, slowly, place it to the machine, while it will emerge stronger color distortion.Equally slowly bring it back, and only a few meters away, turn off.After that, color distortion should disappear.If not, repeat the procedure several times.Do not keep the throttle included long, to prevent it from heating.
If even demagnetize an external choke has not led to the desired result, the machine is broken Convergence.His adjustment Trust the experts.This is due not only to the presence of a TV or monitor with a high voltage, but also the complexity of the procedure - for it did not undertake any technician.