- - SpeedFan;
- - AMD OverDrive.
In a situation where fans can not cope with this task, they need to be adjusted or replaced.Begin the process of dispersal fan installation program SpeedFan.Note that this utility is not suitable for use with most laptops.
Run installed program.Click the Configure button, and then click the tab Options.From the Language menu Russian.Click "OK".At the bottom of the menu that you will see some names fans.
Just above is a list of devices that are connected to these coolers and temperature.Increase the speed of rotation of the fan desired by pressing the "Up".To automate the process of changing the fan speed, press "Avtoskorost fans."
When using this program, you are unable to increase the speed of the blades coolers, but your computer is working with processors fr
om ADM, set the utility AMD OverDrive.It can be downloaded from the official website www.ati.com .
Start program installed AMD OverDrive.Wait until the process is complete scanning equipment.In the left column, locate the Fan Control menu and go to it.
changing the position of the runners at the bottom of the pop-up menu, increase the fan speed.In that case, if you want to automate the procedure of changing the fan speed, select Automatic for the desired fan.
to consolidate the effect, click Apply.Do not close the program.Click Preferences, located in the top right corner of the screen.Go to Settings.
tick the Apply my last settings when system boots.Click Ok.Close the program.Start and SpeedFan Check the temperature sensors.
Tip 2: How to disperse the cooler
If you want to overclock your graphics card cooler, remember that for its subsequent safe and stable operation requires a good level of cooling and properly chosen frequency type.
For this purpose there is a special program called RivaTuner.To test the settings, use the 3DMark.
Despite what model of video card, install RivaTuner.Once you do this, the program minimizes to the bar near the clock.Remove it by clicking the mouse.You will see the main window of the inscription "Settings" next - a triangle.Click on it to bring up a new menu.To open the Control Panel, click the icon frequency circuits in the menu called "low-level system settings."
So, before you - two sliders that can be moved and, thus, change frequency and memory chip.Please check the box next to the item that allows overclocking - it is located above the slider.Approximately margin to increase the values determined by the program, labeling it up a notch.Tip: gradually raise the rate by a few percent.And after each of these changes, click the "Test" before applying frequency.After you adjust the frequency, in paragraph entitled "Start with Windows» tick.
Then adjust the fan speed.Click on the tab "cooler."Let putting another check of the following parameters change and look at the menu.Decide whether to automatically measure the speed with increasing temperature or you do specify the speed that you deem necessary, in percent.
Now you need to test your overclocking.Run 3DMark, select any of the tests and liked looking at the pictures of the games later on.The program will calculate performance over time.If your system works normally, it means that the card has become faster.