Any carpet , especially natural wool - something quite difficult, so hang it on the wall necessary using special hardware.In most cases, this just become housewives in the sewing shop called carpet ring - metal rings, equipped with legs with slots for threads.Their sutured equidistant from each other around the upper edge of the mat.
When all the rings tightly sewn, line on the wall of the corresponding points are marked, which are driven into the studs.Then they hung himself carpet .This is the easiest and most traditional way to hang carpet on the wall , but not the best.Firstly, at the same time spoil the wall because it takes a lot of nails, secondly, over time carpet begins to sag between the fixed rings and gather in the folds, which are very difficult to destroy.
.A more gentle way - to hang rug on a wooden rail.For this purpose in the upper part of the wall with holes at a distance of the width of the carpet.They clogged traffic jams, which in turn is attached with screws wooden rake.The rail are driven small cloves at a short distance from each other, and they have hung himself carpet using numerous carpet rings.But this method is suitable only for a brick house in which to drill the wall.
If you do not want to hang carpet using rings for fear that it will creases and wrinkles, you can use nylon string and steel wire.For this, the upper edge of the carpet on the reverse stitching nylon thread so that the stitches do not exceed 50 mm.After they passed a steel wire, which, in turn, jumped on a carnation, embodied in the rail.The weight of the carpet is automatically distributed evenly across all the nails, and the carpet will not have any creases.
If you really do not want to spoil the wall any holes, you can drill the holes for the dowels into the seam between the wall and the ceiling.On the dowels to fix a firm, taut line, which already hang carpet .
- How to Hang a carpet