Guide
1
essentially only two ways: mechanical and chemical.
Silicone Sealant adheres to the surface once and for all.If you just have not erased fresh drops of silicone with ceramic tile or enamel baths, its removal will be for you a very time consuming task.Take stationery knife and carefully cut the silicone layer by layer.Trying to pull out the silicone is not necessary and try not otderete, and if you turn out, it is only a piece of the base to which it is stuck.Remains erase wire wool or abrasive cleaners.
2
It often happens that when sealing joints are not complied with the manufacturer's recommendations.As a result, the sealant sometimes falls off.In this case it is necessa
ry to remove all the sealant prior to applying a new, as the sealant to sealant glued with difficulty.And germetizatsionny seam with patches will not look aesthetically pleasing.
3
If you can not remove the sealant, use chemicals.Now, many firms produce solvents sealant.It Quilosa, lugat, CRC Gasket Remover, Penta-840, and many others.In most cases, drug silicone remover is in the form of aerosol or paste.
4
Depending on the time of application of the solvent, a sealant can be easily removed or transformed into pulp, which is washed off.Be sure to check the reaction of the surface in an inconspicuous corner, because most of these substances dissolve not only the sealant and enamel, varnish and paint.
5
When spraying aerosol, use personal protective equipment: a mask and gloves.Use only in ventilated areas.Shake the bottle and apply a thick layer on the surface.There are sprays rather quickly, so in 20 minutes you can already remove the sealant, and the remains clean cloth or spatula.If you are not satisfied with the result - again.