you need
  • - Screwdriver;
  • - pliers.
To remove the door handle , find out what it is you design: standard or click mechanism.Conventional pens are of two types: - handles that are fastened with screws on both sides of the door , these screws can be 2 or 4;
- handle with a rod that passes through the doors close , and the handles are bolted to nemu.Esli you handle fastened with screws, he took a screwdriver, unscrew the screws and remove the handle .Look what she has broken, find out whether it is possible to put the exact same or similar design to that location.After screwing the handle in place already have holes from the screws that are difficult to be repaired or hide.
To remove handle , having a common core, you need to determine whether it really is not.Turn the piece with one h
and counterclockwise while holding the other part of the back of the door .If the handle otkruchivatsya beginning, then it pivotal.Remove handle with one hand, then with the other hand pull it together with the shaft of the door leaf.Also carefully evaluate its condition, at this point you can now put only pivotal door handle .But you can put with a mechanical latch, if the hole is closed by the rod of a new furniture.
To remove handle with mechanical latch, take a screwdriver and remove the screws that fastened around the handle decorative hardware.The main part of these handles is: tetrahedral rod mechanism and movement of the tongue.Loosening the fittings, see what keeps the handle itself.There are 2 options: in tetrahedral rod there is a hole in the handle moving too, and there is a small stick with a pin of a hat at the end.Remove the pin of handle comes off.Now with the other hand pull it together with the rod, after unscrewing the consignment accessories.That's all.