you need
  • abrasive paste, sander, sandpaper, primer for plastic, water, rags, acetone, lacquer
Guide
1
First, prepare to be repaired surface for repair.If possible, separate the item from scratch, clean it from dirt and dust, and wash thoroughly.If the product is painted, remove using sandpaper or a grinder loose paint repair in place, trying to do but there is roughness.
2
treated sandpaper smooth out the surface of the product with acetone.To do this, soak a clean cloth composition (it must be lint-free), and then blot the spot where the scratch.This way you clean the surface of the residuals.
3
Prepare a special primer for plastic .It is generally available in bottles and a spray.Vigorously shake the can and a little drizzle them aside to clear the channel and avoid the formation of lumps on the treated surface.
4
Apply primer to the place where the scratch by moving the spray jet parallel to the surface of the product.First, apply a thick layer of primer, after drying to re-apply a thin layer.If necessary, you can add to the two layers of the third, the easiest.After this treatment, the surface of the plastic must dry.
5
Once again, treat the surface with sandpaper and wipe with acetone.Now paint the plastic in the desired color.Treat closely to the selection color tone, to prevent a noticeable difference between the color of the base coat and the color of the treated area of ​​the product.Spray paint is done in two or three thin coats, allowing the paint to dry after each application.If the scratch is deep enough, the number of layers should be increased.Emerging drips of paint must be removed immediately with a clean damp cloth.
6
painted objects aside to dry the paint, after which it is ready for use.