Remove spots of the resin can be using solvents - gasoline, acetone and others.If the stain is stubborn and inveterate, take a stiff brush and not simply wipe the stained fabric in the resin, and slam on the spot brush.The fibers at the surface are softened tissue and fluff, which provides deeper penetration of the solvent into the tissue.This way you can remove stains from resin dense cotton fabrics.After treatment, stains solvent, wash it with soapy water.
To remove stains resin with dark woolen fabrics, thick treat them with a cloth dipped in turpentine.If the stain is large and inveterate, then dissolved with turpentine resin , remove it with alcohol and then rinse the cloth with so
To remove fresh tar stains, wipe them with a soft cloth moistened with benzine.If this is not at hand, you can take a simple gasoline, kerosene or turpentine.
To remove old stains, try the following method of resin - mix 1 teaspoon of potato starch, a few drops of turpentine and ammonia, apply the mixture on the stain and leave to dry.After that you need to clean the contaminated area with a brush, repeat the process if necessary.After this treatment, the fabric may be left on the macula, which can be removed with a solution of hydrogen peroxide.
Print stain from the resin can be another way.Scratch resin with a tissue and fill the stain with a mixture of alcohol and turpentine in equal proportions.Now iron the fabric through the white blotting paper, wait until the stain is dry.
If available means fail, use the special stain removers for resin.Moisten a cotton swab tool or a piece of white soft cloth, blot the first place in the tissue around the spots, and then gradually wipe the stain in the direction from the edges toward the center, then the stain will spread.Clean the stain better from the inside out, pre-clearing dust cloth.First, use a weak solution of a solvent or stain remover, and, if necessary, increase the concentration.
Tip 2: How to clear from the resin
Before proceeding to the removal of stains on clothing, it is desirable to accurately determine their origin and find out characteristics of the material on which the spot formed.After a hike in the woods or at work at their summer cottage sometimes have regretfully seen stains from wood resins .How difficult is it to bring them?
- gasoline, kerosene, turpentine, potato starch, hydrogen peroxide
To remove stains from resin require solvents (acetoneor benzene), since it is impossible to bring them water.Prepare also a brush with hard bristles - in some cases, have instead wiping dirty place to put short punches brush.Such a method would allow the liquid to penetrate deeper into the tissue.
To remove fresh stains from resin moisten with benzine soft cloth and ototrite pollution.Suitable as regular gasoline, kerosene or turpentine.
Old stains removed by a mixture of potato starch (one teaspoon) and a few drops of turpentine or ammonia.Dampen the stain with the composition and leave to dry, then clean with a brush.If after the first treatment the stain persists, repeat the procedure.The remaining yellow stain clear with a weak solution of hydrogen peroxide.
When processing the resin stains on wool products, keep in mind that white fabrics stain should be removed with soap and alcohol, and with the dark - a dense cloth dipped in turpentine.
With cotton fabric stains resin output gasoline or turpentine, then wash with soap and water spots.Big spot moisten first few times turpentine.After dissolving the resin wipe the stain with alcohol and then with water.
In very difficult cases, scrape off the stain from the resin mechanically (knife) and fill with a mixture of turpentine and alcohol in equal proportions.Then iron the fabric by blotting paper and wipe dry.
Resin stains on the products of artificial leather in any case, do not output solvents (alcohol, acetone or gasoline).To do this, use warm soapy water.
If you do not know the type of material, cut a small piece of the seam or hem, do a spot check on it and stain remover action.This is especially important for non-ferrous materials.
Withdraw spots from the wrong side of fabric by placing the spot white paper towel or a wooden plank wrapped with several layers of clean cheesecloth.Start removing stains, weak solution, if necessary, you can gradually increase its concentration.
- How to remove stains from resin and rust?
- resin to remove