Tip 1: How to build a shed for pigs

With the right content, you can get a good hog revenues.To content fit well the growth of pigs, you need to build a pigsty.The wrong erected shed piglets begin to hurt, so the owner is unlikely to get the expected profit.
you need
  • - sand;
  • - rubble;
  • - cement;
  • - tes;
  • - building materials;
  • - coating for roofs.
Guide
1
for pigs need to build a major winter barn and machines for summer maintenance.Equip pens for pigs in the summer is essential.If they contain the only year-round in capital structure, it quickly will become worthless, moreover, in this case, once it is repaired.
2
for the construction of the winter the room must be filled with a solid capital foundation.It should be installed to a depth of 60-70 cm and 30 cm above ground level.Also keep in mind that the area of ​​premises for keeping the number of pigs to be large, that is not less than 5 sq.m.per head.And for each sow will need a separate machine, as well as for breeding boars.Therefore, you must immediately provi
de the desired size of the foundation.
3
walls can be made of any material, but inside the machine for pigs need to further decorate the walls strong and thick wood.This is to ensure that animals are not gnawed through the wall, which they often do, irrespective of the wall material.
4
roof to install pent pigsty, and make a small attic as attic pigsty for anything not in use.From pigs there will accumulate moisture, even if you make a quality ceiling vapor barrier.Installing roof vents should be provided and to bring them out of the barn in the form of pipes.
5
subfloor in a pigsty made by pouring cement.In the backyard is usually an additional set wooden floor.It would have to be changed frequently, as it quickly becomes unusable because of dampness and desires all pigs gnawing.To avoid additional costs for permanent floor repair, it is possible to leave the blister floor or mounted on a grating, which are intended for keeping pigs in mass rearing.
6
general area barn divided into individual pens using thick timbers and poles.It should be spacious enough to leave a corridor for the transfer of pigs from one machine to another, and for ease of cleaning the premises.In the front wall of the corridor is necessary to make the transom for disposal of manure.
7
All you need to shed obtyanut steam insulating material on the outside.It should establish a thick layer of insulating material.
8
Summer pens can be made of thick planks without insulation.The main thing is that there are no gaps.

Tip 2: How to build a barn right

building a house always involves the presence of different materials and tools that need to be stored somewhere.A way out could be a barn , the erection of which will need no more than a day.All you need - is the raw material for production and little skill.
How to build a barn right
you need
  • logs, beams, planks, roofing slate, nails, staples
Guide
1
Prepare a thin beam of 100x100 mm, two-edged boards(thickness of the first - 25 mm, the second section 150h50 mm).You will also need slate roofing, nails and staples.
2
Since the construction of the shed all leaves a different amount of time necessary to make temporary supports of brick.It protects sill from humidity.In support lay waterproofing.
3
Place thin logs.Make a gusset and at fixing nail nails.
4
Set the rack.Their number depends on the size of the building.Strengthen nails should be a temporary braces, diagonally at an angle of 45 degrees.
5
at the front, set the upper stud and nail.At the same time the upper edge of the binding on the back and the front of the barn must be brought to 250 mm.
6
cantrail cover crate.Cover the top of the roofing material.Nail slate.
7
Take timber 50x50 mm, and set it as the permanent stays.They should be placed in the corner post, diagonally.Where will be located the door, and set the rack.She secure bolt.We get an opening in which to place the door frame.
8
at the front of the barn nail boards.At the same time if you use edged boards, nails her tight.Unedged when overlaying course.First, put a beveled edge to the board itself, then - from himself.
9
barn walls are ready.It remains to sheathe their roofing material on the outside of the bottom up.The upper edge of the roofing should overlap the bottom.This lining will protect barn of natural phenomena and precipitation.
10
logs into thin sill impose floorboards.Hang the door.Install the lock.
11
As you can see to build a barn , where you can store a variety of items and tools, it is easy.Of course, its appearance is not too attractive, but it's for the better.Thieves are unlikely to pay attention to it, and therefore, the property will be saved.
Note
Pigsty consists of two branches with two-range.Build it can be improvised building materials: timber, boards, and so on. N. On the concrete floor thickness of 30 cm on the top two rows of flooring tarred boards.In climates where harsh winters, it can be double walls and insulate them with foam.The roof can be made of planks and pent.
Helpful Hint
pigsty Construction should begin after a detailed render a number of pigs, which the owner is going to keep its economy.If you understand, then you can build a pigsty out of any available building material, which is always there in abundance in any garden land, but there is one wish - not to use or to minimize the use of concrete in construction.
Sources:
  • room for pigs

0
0