- - rails;
- - a hammer;
- - nails;
- - building level;
- - Screwdriver;
- - screws;
- - Drill;
- - PVA glue;
- - wooden plugs;
- - fired pins for insulation.
Select blockhouse .To carry out external works is recommended to get a blockhouse , for interior work - narrow.
Leave panel block house well for several days in a room where the finishing work will be carried out.This material requires acclimatization.
Spend waterproofing of the facade of the house.Waterproofing sheets should be installed with overlap of 10-15 cm.
Before installing battens need to treat i
t with antiseptic and refractory composition.Keep in mind that the installation batten rails should be installed vertically.Check the correctness of their installation must use the building level.The distance between the batten should be 60-70 cm.
Insulate building.Insert sheets of insulation between the furring strips and attach them dyubelyami- special nails for thermal insulation.Cover with a layer of insulation, another layer of waterproofing.
Place another layer, attaching it with screws to the existing structure.This layer is required for ventilation block house and on the inner side.
Secure blockhouse on crates.Home recommended trim from the bottom up, starting from the corner of the house.With this method of installation facing the house will be the most accurate.When facing angles necessary to leave the allowance of a few millimeters to one side of the house.
Drill hole depth of 10-20 mm and attach block house on crate using screws.The openings should be sealed with wooden plugs, previously missed them with white glue.The protruding portion of the plugs must be cut and polished.
When installing blockhouse and the top and bottom is necessary to leave a gap serving ventilation.Gap - 50 mm.Between the board also needed clearance of 1-3 mm to the seasonal variations in temperature and humidity of the surface material does not start to buckle.
Cover blockhouse varnish or paint.Before painting neodhodimo carefully remove all dust from the boards.Be sure to apply a primer before applying the first coat of paint.
Produce painting ends of boards, groove and spikes should be mounted to a block house, becauseduring operation the tree will wither and at the junction of the boards can occur NOT, stains.