Tip 1: How to set a built-in hood

good host knows that when properly installed hood - the key to the safety of his home.Therefore, we must do everything by the rules, and attach where necessary, and to rely on "maybe".Please note that there are several places you can and / or should be fastened hood .This wall, ceiling or the kitchen, if he has a specially adapted for this purpose fixing.
Guide
1
Work with any equipment and installation always starts with the instructions.Please read it and check the components, if all parts are in place.That then the installation process it became clear that something was missing.The process of dismantling is not desirable.It is better to prevent such a possibility, showing attentiveness.
2
Before installing the hood, do the standard operation - unpack and check for integrity.
also instructions should Arrangement drawing depending on design solutions in your kitchen or the arrangement of furniture in it.
3
During installation, you must leave the drawer visible, and hide the rest
of the hood on the wall or cabinet, depending on the type of installation.No matter what the connection method you choose, as long as the outlet was connected to the exhaust vent shaft.It is impossible to air stagnated, it must circulate.
4
In order to properly connect the hood a ventilation shaft you need a special set of ducts.Usually these pipes are selected in the beginning of the extraction when purchasing.But nothing prevents you buy them later.In any case, without proper installation drawing will be impossible.Ducts are made mostly of aluminum foil.But there are also so-called corrugated pipes.
5
correctly calculate the duct diameter.It should not be less than the exhaust outlet.
6
During installation, avoid unwanted twists and turns of the pipe, it will reduce the permeability of the pipe and therefore its performance.Hood is underperforming.
make a separate electrical outlet for connecting the hood.
7
To increase the security of the device, set antivozvratny valve.This device will not give back the inflow of exhaust air, because it is fraught with the return to the kitchen odors from the ventilation.There
hoods, which antivozvratny valve is sold complete, but there are models for which such a valve must be purchased separately.It is better to buy a fully staffed hood .You will not have anything to run to buy more, and mounted it easier and faster.

Tip 2: How to choose an embedded hood

Fragrances preparing food supplement for many people the image of the home.Just imagine that in the evening or in the afternoon at the large kitchen table going big noisy family.In reality, the smell of food coming from the kitchen, is fraught with not only gatherings of households, but also "sweet-smelling" clothing, hair, curtains and furniture.To avoid such troubles, it is necessary to select the right embedded extract and install it.
How to choose an embedded hood
Guide
1
Built hood has little effect on the overall interior of the kitchen, because the whole construction is visible from a surface located above the stove.However, manufacturers do drawing in a different design.
2
Suitable dimensions - the main condition that must be met when choosing an embedded hood for the kitchen.Choose hood , the size of which will fit into your kitchen, but most importantly - will match the dimensions of the plate.The diameter of the exhaust duct must be slightly larger than the hob.
3
Choose a model with built-in hood filters coarse and fine.Coarse filters are also called cyclone grease.They consist of a grid, which can be washed when dirty.As a rule, they are supplied with the extracts in the original equipment.In addition, to better capture odors need fine filters or coal.They are designed to work in recirculation mode, which is used in enough good ventilation and allows you to keep the heat inside.If the carbon filters are not supplied as standard, buy them for an extra fee if needed.These filters must be changed periodically.The second mode, which is usually set up "by default", is designed to remove heat generated above the hob.For this mode rather coarse filters.Embedded extracts is established, as a rule, from 1 to 4 filters coarse and fine.Each additional filter reduces the speed of air filtration hood.
4
consider when choosing a built-in hoods and performance.This is one of the main parameters that are worth paying attention when buying.Performance is specified in cubic meters per hour.Multiply free of kitchen equipment and furniture in the kitchen area ceiling height to get the required amount.Based on this amount, and we need to choose hood .The more performance, the more noisy the appliance will work.
5
There hoods, in which you can select speed mode.Generally, the faster the air filtration, the faster and more fan noise.Choose a model with speed regulation, if you have a need for "quiet mode."Modern extracts is from 2 to 8 speeds.The fan built into the hood can not be one.At the same time two fans at the performance will be quieter than a large one.
Note
to reduce noise better installation is better to use smooth metal ducts, direct and with a wide cross-section, and choose the drawing with special "acoustic package" and special bearings in electric motors.
Helpful Hint You can also select a model embedded extracts additional features, such as halogen lamps or illuminated light bulbs with the sleep timer or electronic control.Another "bonus" feature - "remaining play."If any extractor is working at minimum speed after turning off.

0
0