you need
  • little bricks, concrete, cement, 50h150 edged boards and planks 25 mm thick, floor boards, boards, nails or screws 150.
Guide
1
Before you build a porch, it is necessary to mark the place where it will be, to determine the size.After that it is necessary to fill the area under the porch.Before it should prepare shuttering formwork height of 70-100 mm.Then you need to put on the perimeter of the future masonry porch height of one brick.As a result, she, along with logs and batten should be flush with the floor of the house.On top of the laying plank roofing waterproofing.
can then collect the frame porch.It is necessary to reinforce the four corners of the brickwork pillar.Their height
should be slightly below the struts house.It is necessary to create a roof pitch to her dripping with moisture.On the rack nailed boards.Cantrail else to do, it will replace the ceilings - the rafters.
How to make a porch
2
When the frame is ready, it is necessary to fix it on the ceilings.One end should be strengthened on the studs and fasten to the front frame and the other fixed on the ceiling of the house.So you can create just the ceiling and the roof.
Then, right in the rack openings is necessary to put window units.From the street you can sheathe porch "dyuymovka", then to decorate the siding.Inside the porch floor to be done.To do this, put Doschatoe logs, pre-impregnated with an antiseptic them.Boards should be put on the edge.Step should be 500 mm.One edge of the joists crashed into the beams of the house, the other is mounted on the brickwork.When the lag set, can be laid floorboards.
3
It is hardly necessary to insulate the porch, because there is no one going to live.Therefore, after the construction of the porch you can immediately start to finish.It is necessary to attach to the frame, wall and ceiling linings, she looks great.The number of steps depends on the desires and needs of the owner.Before they do, it is necessary to carefully calculate the step to comfortably climb the porch.When all the work to create the steps are completed, you can set it and paint the door linings in the desired color.