Guide
1
The instantaneous water heater heating occurs directly in the flow of water through the pipe.Accumulating typically have stainless steel tank, in which the collection and subsequent heating.
2
Carefully read the device data sheet, pay attention to the installation instructions.Check the wiring in your home, the supply voltage using a tester and a special screwdriver indicator.The electrical outlet for the water heater must be located in a dry place and have a grounding prong.Power for the electric heater must be submitted on a special line directly from the switchboard.
3
Select a location (the wall) locations of the heater.For water heater wall should be strong enough to withst
and the weight of a double-filled tank.In addition, water heater should be placed as close as possible to the place of use of hot water in order to avoid unnecessary heat loss.For proper installation of the heater in his kit includes mounting brackets and mounting plates.Focusing on the dimensions given in the instructions, drill into the wall in the desired location using a drill hole or a punch, insert the plastic anchors and in dowel - screws.Secure the screws mounting plates, hang heater on strips with brackets.
4
Connect water heater to the water supply using the pressure relief valve supplied with the unit.Wherein the cold water pipe connected to the lower nozzle valve.Hot water pipe is connected with an outlet of the heater.
5
Open the tap cold water supply.In the future, it must always be open.Open the hot water tap and wait until the water will pour out, which would mean the complete filling of the reservoir.Close the hot water tap and plug the heater into a power outlet.After a few seconds on the control panel lights come on, turn on the water heater button "VklVykl" and program it according to instructions.