- - Screwdriver;
- - forked plastic pipes or pipes with a tap.
Determine where to install a washing machine .This could be a separate room, bathroom, kitchen.Important proximity to the water and sewerage system in the house.Think about whether there is enough length of the drain hose from the machine and is exactly how you want to organize the sink - whether it will go directly into the sewer or drain hose is mounted on the edge of the bathtub or toilet.
If you choose a way of organizing the discharge at which water from the washing machine merges into the tub or toilet, then check the level to which the drain hose is raised.Refer to the instruction does not exceed the level of the bathroom this distance.The drain hose must be po
sitioned freely, without kinks.It is supplied with the washing machine has special holders for the drain hose installed in such a way - you can use them.This is the easiest way to organize the drain.
Equip sewer additional tap into if you decide to empty the machine directly into the sewer.Use one of the two methods described below.
Find a siphon or corrugation if the siphon is not available, under the sink in the kitchen or a bathroom.Find a place of their connection with the sewer pipe.Rather, it is an opening damped rubber sleeve, which is inserted into the pipe from the siphon, or corrugation.Rubber sleeves must be removed from the hole, its outer diameter is the diameter of the sewer hole, and the inner - the size of the corrugations.Then purchase bifurcated plastic pipe coinciding with it (sleeve) on the outside diameter.Plug-cuff through rubber seals forked tube so that one end thereof is left in the sewer pipe, and in the other two it was possible to respectively insert the drainage hose from a washing machine and corrugation of the sink or tub.
Unscrew the straight tube extending from the shell to the siphon.Purchase a plastic tube with a tap of the same diameter.Replace the old to the new pipe.Drainage from the washing machine using a sealant to attach the allotment.
Tip 2: How to drain the washing machine
easiest way to organize the washing machine drain in a sink or tub.It's enough to be mounted on a special hook the hose supplied with appliances.But in this case the surface of the enamel bath or basin always have to be cleaned of contaminants.In this regard, the stationary sink much easier.
- - a flexible hose;
- - plastic mounting;
- - siphon;
- - seals.
Check the central sewage system.If necessary, clean it in order to ensure normal water gathering.Secure fitting of the drain hose on the siphon using the drain required diameter.It is advisable to use the knurled ring fittings, which provide a secure hold.
If your kitchen or bathroom a special sewage removal under a washing machine, equip drain through a separate siphon (check valve).Install sewer siphon to the appropriate outlet.As the seal using a rubber cuff.
Secure the drain hose to siphon sewer.How it works in this case, based on the motion weighted ball that rises up when draining the water and provides a normal descent of the liquid into drains.
Once the water is gone, the valve occupies its original position, preventing the ingress of liquids and odors from the sewer hose washing machine.
In the absence of technical capacity to drain through a separate siphon organize the washing machine drain directly into the central sewer.Secure the end of the hose fitting in the outlet drain.Install the seal of the appropriate size.Practice shows that in most cases advantageous gum 40h32 mm.Fix the fitting and sealing rubber band so that when specific process water drain hose is not broke vibrations.
drain hose washing machine should be cleaned periodically from dirt and impurities deposited on the inner surface.Regularly clean the siphon and, because of contamination impede the normal drainage of water.
Remember that place where the drain hose attached to the sewer allotment must be located below the area where it connects with a washing machine.Otherwise, the waste liquid will not flow into the sewer system and the machine frame.
When extending drain pipes (maximum indicated in the instruction manual of the machine), take care not to change the diameter of the drain, the drain hose is not bend, or pinch throughout their length.All this is necessary for the operation of the electric pump.
If the floor in the room is equipped with a sink, you can make free draining directly from the machine itself, comfortably securing the drain hose.