you need
  • - vinyl siding;
  • - Roulette;
  • - hacksaw with fine teeth;
  • - a plumb and level;
  • - antiseptic;
  • - rollers, brushes;
  • - screwdriver.
Measure the length and height of the walls, which will dispose of vinyl siding.Baby panels, focusing on the longest wall.In this scenario, you will have a minimum amount of waste.
Calculate the number of panels.Multiply the length by the width of them, and then compare that number with the area of ​​the walls of your old house.It is best to make the drawing separately on each
wall paper material and thus calculate.You'll see where you can adjust the trim siding to repair a left economical.
Choose the color of the panels that you no longer have the soul.This vinyl material is represented by a huge palette.If you attach a little imagination, you can combine the siding from the same series but different color.
If your home has been lined with clapboard, it is not necessary to dismantle it.Only remove rotten or badly warped dies.Fix Loose or rough spots.Screw the exterior decorative elements, gutters, shutters, if any.Deal with all the walls with antiseptic.
Make lathing on the outer walls of the old house.Check the surface of the walls of the level and plumb.Vinyl siding must be attached to the flattened areas.Consider this point when installing the foundations of wooden slats.
Fill in the distance between the fixed rails insulation, which select on your own.Above the vapor-proof insulation film fix a stapler.
Obsheyte old house siding.Between the plastic panels, wooden walls and insulation will be a small air space, which will provide adequate ventilation and do not give the walls covered with mold.
Vinyl siding - durable material.It can be used in climates with large temperature differences.To wash the exterior walls of the house covered with panels, enough to use a water hose.A strong jet wash away adhering dirt, and the house is sparkling clean.