Tip 1: How to make yourself warm water floor

house in which we live, to be a cozy, comfortable and warm.The heating system in our homes, generally represented radiators.

But increasingly installed for heating warm water floors.Water Floor - a system of pipes which is laid between the floor and the floor covering, and which circulates warm water.Water heated to 35-40 degrees.This temperature is ideal for heating.
you need
  • underfloor heating pipes, manifolds, automation, minipol to 12 sq.m, minielektrokotel.
Guide
1
Water floor can be installed by hand.It is only necessary to have some engineering skills.Warm water floor installed in private homes and apartments.
First you need to do the project.If there is any doubt in their own competence, it is necessary to consult with experts who can help make the project and choose the right set of pipes for water sexes.
But you can do everything by yourself, if you pick up an appropriate set of equipment for self-assembly.You will need the following equipment set for warm water floor: underfl
oor heating pipes, manifolds, automation, minipol to 12 sq.m, minielektrokotel.On the set of equipment for installation of warm water floor and says: "Good for self-assembly."Then you can proceed to the installation of water sex.
2
If the house and the wooden floors, the installation is used with grazing systems.Grazing systems are suitable for all types of buildings and divided into two subsystems: polystyrene and wood.The main difference between grazing systems on concrete systems is the lack of wet process, which reduces the time for installation of equipment.
3
Most used concrete scheme that is laid pipe filled with concrete.This scheme is useful in that the concrete pipe firmly holds and protects them from damage.Before laying the pipes must be put on the subfloor insulation material.
4
After installation of warm water floor held crimping system.This process of filling the pipe with water, a kind of test.If done correctly, the pipes filled with concrete.
After complete curing of the concrete is laid on top of floor covering.Best suited tiles.But it is also possible to use laminate and linoleum.

Tip 2: How to make yourself warm water floor

Installing underfloor heating to ensure the optimum and uniform temperature distribution in the room.One of the advantages of underfloor heating, it is possible to save energy and maximize the use of the surface areas.
The underfloor heating is comfort and warmth.
you need
  • to perform the work required polymer or multilayer pipes, edge tape, profile gasket for separating seam polystyrene with film, studs for fastening pipes, tools for mounting studs and plasticizer for concrete.
Guide
1
to regulate the underfloor heating are special valves, mounted in the rack cabinets.

first stage of installation of underfloor heating is the training ground.Its surface must be flat and horizontal, without irregularities, which can damage the foam board.

After preparing the floor decompose edges of the tape to separate the heating plate from the walls, as well as limit the heat loss through the walls.Edges of the tape is placed so that after the Bay of concrete ties and laying the flooring, she appeared on its surface.Excess tape is cut off after the construction work.Then proceed to the layout of the styrofoam.
Options for laying underground water heating.
2
Styrofoam with the film is simultaneously thermal insulation and waterproofing.If the overlap is below may be subject to moisture, the film also fits under and polystyrene.Film strip, protruding outside the contour of polystyrene should be put on an adjacent plate overlapping, in order to obtain an airtight sealing by the screed.Now we can lay the pipe in a spiral.Helix depends on the geometry of the room.The distance between the pipes must comply with the project documentation, as heat affects the underfloor heating.Pipes to the expanded polystyrene is attached with special tooling for stud bolts.
Variant of laying pipes in a round room.
3
for accurate and reliable installation requires two people.After forming the loop ends of the pipes are connected to the flow and return distributor taps.Maximum surface of the heating plate can be 30m2 in connection with this, large areas should be divided into smaller portions separating seams.Separating joints should be carried out also in doorways.Pipes, in such places must be laid in a corrugated tube.The length of one plate should not exceed 8 m, and the ratio of its sides must not be greater than half the length.
Driving laying underfloor.
4
Underfloor heating is a low-temperature heating system, and depending on the flow temperature, the relevant types of valves.Distributors with mixing devices lower the temperature of water supplied to the required parameters.This type of distributor is used for simultaneous operation of underground and radiator heating.If the boiler launched a separate low-temperature circuit, for example by a central heating system, then the distributors without pump, whose task is to regulate the water flow in separate circuits.

installation in distributors of special electric servo motors, allows you to adjust the temperature using the room thermostat.Pressure test conducted to verify the integrity of the system.If the test pressure have been positive, it is possible to begin the concrete screed.To fill the mortar is applied with addition of plasticizer.The hardening time of the concrete screeds from 21 to 28 days, then you are ready to start heating.
Sources:
  • how to make water warm floors

0
0