you need
  • - flushing chemical paint;
  • - rags;
  • - Building a hairdryer;
  • - spatula;
  • - sander;
  • - degreaser or white spirit;
  • - primer;
  • - paint;
  • - gun;
  • - brushes;
  • - roller.
Guide
1
coloring to get a smooth and long on the surface, remove completely all the old paint.This can be done by chemical, thermal or mechanical methods.For cleaning old paint chemically applied on the entire surface of the chemical in the form of a gel or foam.Then, the entire surface is wiped with a cloth.For thermal method uses a hair dryer building.Mechanical cleaning is to remove paint from different spatula by hand or using a grinding machine.
2
If the surface garage and steel, then it must be all the grease.For this purpose, a special
degreaser or white spirit.Rusty garage be maximally cleaned of rust.
3
After degreasing, a layer of primer.You can use any primer.Strongly rusty garage better to cover the second layer of primer after drying of the first layer.Since the paint is better entrenched and there is less likelihood that the rust tread through it.
4
paint should be chosen for the exterior.It should be applied after complete drying of the primer using a roller, brush, spray gun or at least two layers.
5
If a gun, the most smooth staining can be achieved by the joint use of the compressor.The gun should be kept at a distance of 15 centimeters.If at first you do not get enough intense tone, it means that the paint too thin divorced.Airbrush painting is carried out on three layers, and with a brush or roller on the two layers.Each subsequent layer is applied after the full drying of the first.
6
If garage painted silverfish, spray gun can not be used because it will become clogged due to the fact that jewel diluted varnish, and if diluted paint to the liquid state, the paint just will not stay on the surface.