you need
  • - pipe with the necessary fittings, couplings, adapters, etc .;
  • - support;
  • - clamps;
  • - brackets;
  • - fasteners;
  • - instruments.
Guide
1
If the probability of temperature changes in the operation of the pipe is not great, for example, they are in a heated living space, attach the pipe by means of supports.In this case, the pipe will not be able to move and slide axially.Depending on the design of conduit mounting steps bending or branching in place of the fixture.
2
had the opportunity to pipe thermal expansion, is used to attach the movable support.At the same time the pipeline will be able to compensatory expansion or contraction, and deviate from the road, he still can not.
3
Mark the wall axis pipeline and secure with screws or dowels, nails (depending on the wall material) pipe supports required diameter.If the pipe is to be held at a distance from the wall, you can purchase special brackets.After all fasteners are installed, start the installation of the pipe.
4
Fix pipe clamp or support within a simple click, depending on the mounting structure.To reduce vibration and noise, as well as to partially offset the expansion of the pipe, use clamps with rubber gasket.To support structure collar fastened with metal studs.
5
number of fixtures per meter pipe is determined depending on the material - for polypropylene only one attachment to two meters of pipes, metal or plastic pipes often fix.
6
If possible, put the tube into the channels or Stroebe, in that case will ensure optimum insulation and at the same time fix the pipeline.
7
If you are installing sewer pipes, be sure to contemplate the slope of at least 2 cm to 1 meter, also note that the rotation of more than 90⁰, most likely, will continue to lead to blockages.Before starting work, calculate the location of all pipes and draw around the axis of the wall.