you need
  • - hair dryer;
  • - gasoline;
  • - white spirit;
  • - acetone;
  • - cleaner baths, dishes, windows, etc .;
  • - eraser;
  • - cloth or cotton wool.
First, try to separate the strip of adhesive tape.Pick up the tip and slowly pulling, tear off the entire plate.If you separate the adhesive tape so that you can not, take a hair dryer and heat the surface.Clay with the melt and the band (both paper and film) can be easily separated.
Before removing traces of glue on the surface, check the effect of the agent on an inconspicuous area, as some compounds can dissolve the paint or damaging the surface.For example, paint can corrode petrol or white spirit, and means comprising an abrasive, smoot
h surface may damage plastic windows.
Moisten a cotton wool or cloth lighter fluid (unleaded petrol), mineral spirits, acetone, means for washing (for example, "Mr. Muscle" or "Sanoks gel") and wipe the surface, where he waspasted scotch.
not keep washing liquid for a long time, so she had no time to damage the surface.Immediately wipe it dry with a cloth or napkins.Wipe the entire surface necessarily, even if it is not visible traces of glue - with time they will attract dust and covered with bloom.
If you need to remove a sufficiently large number of traces of adhesive tape, you can purchase a special fluid to remove the labels or means for cleaning office equipment.Apply it to the surface and wait a few minutes, then wipe off all traces of the cloth.
laundered To increase the effect, first wipe sop traces of glue with a sponge soaked in alcohol.Then wipe dry with a dry cloth.
If you fear for the safety of the surface, try to erase the traces of adhesive tape by means of a solid eraser.You can be combined: acetone wipe, wait until dry, rub abrasive (eraser or fine sandpaper), then remove any excess with a cloth soaked in alcohol.