- - bench;
- - tool cabinet;
- - first aid kit;
- - extinguisher;
- - drinking water;
- - rags.
minimum area required for the workshop - 6.5 m2.Getting to the equipment room, laid plans.Schedule it on the balance of the necessary equipment and tools for the cabinet.
room should have good lighting and a floor paved.Make a window for ventilation.Be sure to install several electrical outlets.
main job in the studio - workbench, which is designed to plumbing, carpentry and other work.Its length - 2 meters, width - 70 cm, height 85 cm. Thickness cover section should be up to 10 cm, but not less than 4 cm. It contains the front and the rear vise and also provides a recess for tools.
Racks desktop must be stable and strong.Workbench position under the window
a long part of that light is evenly illuminated surface.Cover the table should be firmly secured to the frame.The table itself attach to the floor.
If the window is on the level of cover workbench, install a shield height of 35 cm. Make it out of plywood or chipboard and paint waterproof paint or enamel light tone.
In a small room, use verstachnuju board.It should be well dried and planed.Length - 1.5 m, width - 25 cm, thickness - 4 cm. Attach it to the wall with brackets or clamps to the table.
mandatory accessory shop - a case for a variety of instruments.It will be constantly updated, so make it comfortable and roomy.
The workshop will not prevent a powerful vacuum cleaner that will prevent large dust.Select a permanent place for capacious bucket, which can be folded bent nails, screws, pieces of glass.Make the necessary supply of rags and drinking water.
operate the tool possible injury.Inside the workshop should be a first aid kit.Take a place for fire extinguishers.
Do not install the stove in a home studio with an open flame.