you need
  • - film;
  • - tank;
  • - fixer;
  • - the developer;
  • - stop solution;
  • - distilled water;
  • - Thermometer;
  • - timer.
Guide
1
equipment needed to show the film in home conditions , you can buy Photoshop, order online or ask a friend.
2
dilute or dissolve photochemistry distilled water, following the instructions on the package or jar.
3
Use a solution of the stop bath a special solution or diluted vinegar.
4
Bring all fotorastvory to the required temperature.
5
close the bathroom or any other dark room so as to have access to water and to show the film in home conditions .
6
Unwind the film from the cassette in the dark, and then insert it into the tank.
7
After refueling films fill the tank of the developer.
8
About once a minute to scroll through the tank clockwise.
9
Soak the right time, and then drain the tank and pour the contents of one minute stop solution designed to stop the process of developing.Pay attention to the development time as the assumptions at this stage will result in an error film unusable (the duration of the developer and the right amount of developers indicated on the inner side of the box from the film).
10
stop solution Drain and refill the tank of fixer.Do not be afraid to overdo it, as if the film would not be sustained in the fixer the right time, in time it will be covered with spots or darken.
11
Wash the film in distilled water, giving a gentle stream of cold running water in the tank for at least 30 minutes, drain the water and hang to dry film.
12
Rinse the film with a special solution to prevent the formation of spots on it, shake it and hang to dry in a sheltered place, pulling in using cargo.