you need
  • - paper;
  • - pencil;
  • - line;
  • - scissors;
  • - tissue;
  • - thread;
  • - sewing machine.
Guide
1
Choose a fabric for the skirt.For this model fit pleated or pleated jersey of any color.Flexibility and features of the fabric drapes in the figure allow the use of very simple pattern skirt.
2
Build a pattern on paper.To do this, remove the three measurements - waist circumference, hip circumference and length of the product.Draw Assistant to more accurately determine these parameters.Measuring tape should be free to impose, without tightening and preventing its sagging.The length of the article was measured by the waist and to the floor.
3
Basing on the Merauke to draw a pattern in the form of a trapezoid.Hem from
the hips to the floor can be left straight or slightly extended.If you are doing a fairly narrow skirt, provide for free movement of the slot.Make her side or back of the center, up to the knee.
4
Draw pattern belt skirt.Its width depends on your preferences and the length of waist circumference is greater than 3 cm. Cloth belt should be the same color and density as the material for the skirt, but not pleated.
5
Combine all the parties to the pattern of 2 cm seam allowance.Cut out the template and place it on the cloth.Be careful when cutting out the skirt - make sure that the folds of pleated material is stretched and straightened.
6
cut parts skirt, proceed to its collection.Treat overlock on the underside of the hem and the slot.Insert the rear panel of the zipper.Sew hand sides of parts connecting them.Sew the skirt to the belt so that the ends are above the zipper of his back.Provide belt buckle hook.
7
Duplicate all the seams on a sewing machine.To maintain the elasticity of the material, select line "zigzag".