- -Slim white paper;
- -zhelatin or starch.
choosing a model for a silk dress, do not overload it difficult or unusual items brim. dress will look great, dropping freely.Silk has a nasty feature - it spreads in the joints.Sew from a narrow, tight things are not worth it.
help strengthen joints lining or cover.They provide a beautiful dress fit.Sew lining separately for the pattern the same as the dress.Attach the pad to the underside underside.So you hide the seams of your dress professionally takes the form of cross-linked things.Case sew seams inside, that is facing the wrong side.Cases recommended for transparent and translucent silk .
Such slippery fabrics like silk, require more time to uncover.Joining silk without basting very difficult
.A little trick - seal the tissue can be gelatin or starch, causing it gently with a brush and iron through the white paper.Carefully select the thread that will sew.Be sure to try the stitch on a piece of cloth.Stitch length set small.The choice depends on the seam dress style, on whether to stiffen the suture or it must flow.Very often it happens that the conveyor sewing machine tightens the soft tissue.To avoid this, place the paper under the fabric.
Follow the direction of stitches.Most sewing machines priposazhivayut backsheet.So if you prostrochite one seam on the front web and the second seam - at the rear, the difference is clearly visible.
If the selected model dresses have darts, use simple method to hide the excess thread.Remove the upper thread from the needle.Thread the bobbin thread instead of the top in the opposite direction, from the needle.The end of the thread tension mechanism above should not be much longer darts.Sew begin from the top of darts, clamping stitches do not.Seam will not disperse, it is made of one thread.
Silk fabric is difficult to put the seam.Instead of a soft landing are sometimes formed rough, uneven build.After removing the thread on a thin tissue may remain visible holes.The problem is easily solved!If you sew a dress with sleeves, sew along the edge of the part-sleeved knit braid.One edge will support the sleeve and the second edge of the slice and wrap scribbled it on top of cut seam allowance.
To avoid problems in the processing of the neck, select the method that is suitable for silk .It is best to treat the gate edging.You can use piping, but it will show through the fabric.If the dress has lining, fold the basic sheet lined face to face and sew the neck of a conventional thin seam.Remove the dress fabric and iron.
to silk does not slide, try to condense.Dissolve gelatin or starch, gently apply it with a brush on the fabric and iron over white paper.
- Pattern original dresses of silk
- dress of silk model