Tip 1: How to make a dog costume

to the holiday was brilliant, make it costumed .It is suitable for children's groups, and adults.It's so nice though sometimes wear a mask and play someone!Well, to be original, choose yourself a custom suit.For example, dog .
you need
  • - vest;
  • - shirt or turtleneck;
  • - pants;
  • - shale or boots;
  • - belt;
  • - pieces of fur;
  • - wire;
  • - thread;
  • - adhesive;
  • - bezel;
  • - fingerless gloves;
  • - paint.
Guide
1
Take a fur vest.It should be black, brown, white or gray.Under it will need to adjust the entire suit.
2
Take a shirt or turtleneck and fur segments of the same color as the jacket.Sew the fabric strip of 3-4 cm at the cuffs and neck (if you chose a turtleneck).If you have a shirt, you can pick up a thick belt that will wear on his neck.Waist circumference cut to the neck or wrap it several times.
3
Take the pants of the same color as the shirt (turtleneck).Sew along the bottom of thin strips of fur.Cut the skin into small irregular pieces.Approximately 1-2 square centimet
ers.Sews them at random over the entire surface of the trousers.
4
Cut two identical strips of fur.Their width should be 3-4 centimeters and a length of about one meter.This will be the tail.Fold them into the fur, then sew (3 parties of 4) and remove.Take the wire.Fold it several times (so as to withstand the weight of the fur) and shove in a ponytail.Sew the last side of the tail.
5
Give tail of this type, which you want.He can hang up, to be screwed on the end, or just to hang out.Sew the tail behind the pants.
6
Take a thin bezel, the best metal.Make four patterns ears.Two of them should be 2 cm long.Put them in pairs (one short pattern, one long) fur inside and sew.Then unscrew them.Attach the ears on the rim.
7
The part that is longer, wrap around the rim.Sew it to the main portion of each ear.Now, put your ears on the rim.Take a little glue and Con them, so they do not slip from the rim.
8
Take slates and glue strips of leather on them, so as not to be seen shoes.If the room is cold, do not take the slates, and boots.Cut them so that they are like shoes.
9
on hand wear gloves without fingers.They can also be pasted pieces of fur.Nakraste tip of the nose with black paint.Draw a thin mustache on his cheeks.Dog costume ready.

Tip 2: How to make a mask dog

for a carnival costume dogs need a mask.It may just be a dog or a popular fairy tale characters, like balls of prostokvashinskoy company's popular French comic book hero or one of Pif Dalmatians.The mask may be necessary for the plot-role-playing games in the kindergarten and home performance.It can be made of different materials.
How to make a mask of a dog
you need
  • - a computer with a printer;
  • - construction paper;
  • - acrylics or gouache;
  • - varnish;
  • - cardboard;
  • - PVA glue;
  • - fabric the color you want;
  • - thick foam;
  • - Paraple pieces;
  • - Pattern hats bonnet;
  • - sewing supplies.
Guide
1
for plot-role-playing games can make mask paper.Mask with slits for the eyes is not very convenient, so it is best to do it in the form of a rim attached thereto dog muzzle.Go to the appropriate picture muzzle dog .Put it in Adobe Photoshop in black and white mode, so that only the outlines, set the desired size and print.
2
Paint mask in the desired color acrylic or gouache, dry and coat with varnish.Apply mask on cardboard and cut along the edges.From the strip of construction paper make the rim.The strip should be slightly longer than the volume of the head, because it is most convenient to connect the edges overlap.Sew or glue them.Sew the rim mask .
3
can make mask dog based caps.It consists of several parts - caps, faces and ears.Find a pattern hats bonnet suitable size.If you have only cap for baby, increase the pattern to the desired size.Sew a hat of thick better, but not very thick fabric of a suitable color.Better if it will be a pattern cap, consisting of two sides and the middle part.The middle part is a strip, and it immediately possible to carve out approximately 2 times longer than the required mold.Sew the hat, cut the seams and edges and sew straps.He let a piece of the middle part of the untreated.
4
to carve out a strip faces Paraple.Its length depends on the size of cap.It must be held from the top to the front edge of the cap and to come forward for 5-6 cm.Sew Paraple by mid-caps and obsheyte its remaining piece of fabric strips.Sew along the edge of the strip, from where it comes out from under his cap, until the middle of serving the short side.Do the same on the other end.Strong is gathered nose and tie the ends of the thread.
5
cut from foam 2 circle with a diameter of 8-10 cm. Obsheyte their cloth.Sew around the edges of the seam "forward needle", capturing the fabric and foam, and slightly is gathered.Sew foam "cheek" to the middle of the short cut paraplenovoy strip to the side of its edge and to the side cap.
6
carve the upper part of the muzzle.Print or redraw the picture, cut from her forehead with the eyes and move on Paraple and cloth.When cutting the fabric thickness Paraple note and seam allowances.Cut out the parts, put them right sides together, aligning all sections.Stitch and turn on the front side.Insert Paraple and seal the bottom seam.
7
Sew the top of the snout to the cap.Put it vertically.In places where the front edge of the cap is connected to the cheeks and nose, sew a new piece to the cap.The preferred pritachivat it a secret seam turns from his forehead and neck.If the upper part of the right will not rise vertically, pull it in the right place a few stitches.
8
Pattern the muzzle.The bottom of the cheeks can be clad with fur and make the fur eyebrows and eyelashes.In place of the nose, sew or glue the felt or leather oval.You can make a piece of felt or drape circle to insert a piece of foam rubber, flash circle on the edge and pull.Sew bead as the nose.Cut eye 2 white ovals, and glue them to the desired locations of the vertical faces.Irises can be made from pieces of skin, or black felt.
9
Make your ears, depending on the dog's breed.For hanging ears carve out 4 long rectangles.Each chamfer angles on one side.It is more convenient to do it in pairs, right sides folded rectangles.Sostrochite ears, remove and put back the pieces syntepon appropriate form.Sew them on a hidden seam lines connections mid caps and the side of its parts and finished their fur strips.
10
Standing ears carve out 4 triangles.You can make the outer part of the same fabric as the cap and the inside - from light flannel.Sew ears to insert the triangular pieces Paraple and seal the bottom.It is possible ears is gathered at the bottom edge and slightly bend to the front part was slightly concave.
Note
In the manufacture of the suit do not use bright colors.The costume should be as realistic as possible.
Helpful Hint
Use fur with a short nap - so the suit will look neater.
Sources:
  • article about making costumes for the holidays

0
0