Tip 1: How to sew a wedding petticoat

Look at her wedding a real princess - this is what most girls dreams.And what is a princess without a dress is?To make sure your outfit was such a need to take care of her petticoat or Petticoats , which will give the right wedding gown silhouette.Petticoat can buy, but it is much more practical and fun to sew it yourself.To do this is not difficult.
you need
  • - white tulle;
  • - white calico;
  • - strong synthetic thread for sewing;
  • - sewing machine;
  • - tapes;
  • - buttons and hooks.
Guide
1
Select the appropriate material.Most often, petticoats sewed of tulle - synthetic fabric mesh structure.If your dress is made of heavy satin or taffeta, tulle, choose hard - it holds its shape well.The dress of fine silk petticoats requires a soft mesh that will not puff up, spoiling silhouette.If your dress with attached petticoat rings can be worn over a petticoat of extra soft tulle.Then relief rings will not appear under the dress.
2
Pattern Petticoat wedding is very simple.In its basis - lowe
r skirt A-shaped silhouette, which are sewn ruffles the same width but different lengths.The shortest is frill at the waist, the longest - on the hem of the skirt.
3
start sewing, measure the length of the wedding dress.Petticoat should be shorter than him by a few centimeters.Determine the desired width petticoats - it depends on the length of the future frills.Measure the waist.
4
Proceed to reveal.Make a pattern skirt base.This can be polusolntse, four or shestiklinka.Cut out skirt of tulle or calico.The latter option is preferable - tight mesh stockings will not tear.Around the waist to leave the cut fastener.Petticoat can be fastened on the buttons or hooks.For greater reliability sew long ribbon that you need to tie around the waist.
5
carve ruffles of tulle.The length of each adjusted depending on the desired fluffy skirt.Lower frill should be approximately three times wider than the lower skirt bases.The width of the frills selected as desired.Narrow skirt ruffles give roundness and greater volume, but they can bristling beneath the thin fabric of her dress.Longer create a smooth silhouette of a bell, but do not give excessive pomp.For petticoat need from 3 to 8 rows of ruffles.
6
Proceed to assemble Petticoats.Every stitch frill along the narrow side to get the ring.Stitch the long edge on the machine by setting the maximum stitch length.Begin prisborivat cloth, gently holding the thread, and evenly distributed folds his hands.
7
Having achieved the desired width, secure stretched thread, tying a few knots.Similarly treat a cut all the frills.Pin or baste them to the skirt so that the top edge of ruffles fell below the seam securing the next 4-5 centimeters.
8
Try petticoats with a wedding dress.Walk around the room - petticoat not be confused in the legs.If you are uncomfortable to move to the lower edge of the frills you can sew weighting - ring the required size or flexible wire.To this end, tuck the bottom edge of ruffles and a narrow prostrochite kuliske.Thread the wire into it.Petticoat ready.

Tip 2: How to sew petticoats

fluffy skirt looks beautiful when worn with her petticoats.You can quickly stitch.For one embodiment not even need a sewing machine - pieces of fabric attached to an elastic band.For the second - do not need a pattern.Create both Petticoat quickly.
How to sew a petticoat
Guide
1
Take a measuring tape.Attach it to the waist or hips to the top - to the place where it will begin petticoats.Measure the circumference, subtract 3 cm. Take a rubber band to wear.It may be narrow or broad.Put it on the value obtained, cut-to-measure.
2
From soft tulle cut into rectangles 40-50, depending on what you are thinking splendor thing to do.The width of 20 cm. The height equal to the length petticoats.
3
Put gum in front of you horizontally.Begin tied to her rectangular pieces.Take the first, fold it in half to the top, he was in a semicircle.Lay the fabric on the gum so that the top of it performed at 7 cm above it.The two ends of a rectangular canvas stick one under the gum and you pull through the semicircular part.To do so with all the rectangles.Sew the elastic band.The beautiful thing is ready.
4
second petticoat sewn differently.Please also measure the volume waist or hips, which will begin petticoat.Divide the value by 16, let it be the figure "X".Take tulle.Fold it in four so that its sides are longer than the product 2 times.
5
Take another piece of fabric, fold it in the same way in four and cut a hole for the top and bottom of the skirt.But that is not all.Total cut 4 are made of four canvases.
6
Each take one side slits.Take two parts.Attach the first side section to the same section of the second piece.Take the third item.Sew it from one side to the other.Thus sew all 4 blanks.Bock last Sew side to the first member.As a result, you should get a thing like a very full skirt.
7
Of the more dense tissue, a suitable color, vykroyte times the desired width.The length is equal to the volume of the hips or waist, plus 2 cm to 3 cm and the seam allowance on for fasteners.Fold it in half.
8
defer to the wrong side of the sides of the belt.Again, remove the face.Fold the front and the back edge of 1 cm. Attach the upper edge of the skirt so that he was between the underside and face belt.Defer until the end, do not forget to make overlapping 3 cm for fasteners.Sew a button, the button or hook.Petticoat, linked their arms ready.
Sources:
  • sew skirt with petticoats

0
0