you need
  • - baking soda;
  • - it cleaning gel;
  • - it cleaning powder;
  • - vinegar;
  • - citric acid;
  • - steel brush;
  • - sponge for washing dishes;
  • - dishwashing detergent.
to layer burning starred with burnt dishes easily, prepare a large container, add to it all the dishes that require cleaning, pour 5 tablespoons of baking soda, pour boiling water and place it onfire.Bring to a boil, turn off the fire, leave the dishes for 12-14 hours.After a specified time, remove all the pots and pans, rinse under running water with a stiff sponge and dish detergent.This method allows you to easily cope with the burning , without making much effort.
If you do not have a large capacity or do not want to mess with soaking, buy a cleaning gel designed
to remove rust.Liberally pour the baked-on cookware, spread the gel with a sponge, leave for 30 minutes, rinse the pots and pans under running water with a sponge.If you remove the entire layer is not burning, and it happens when a deposit is thick enough, repeat the procedure.When using the gel put on rubber gloves to avoid damaging the skin.
with an iron brush and powder detergent you can clean the soot from the enameled, cast iron, aluminum cookware, but such work is quite tedious and takes a lot of time, so the pre-bowl still better to soak in a largecapacity.
acetic and citric acid are also very good at burning .Prepare a solution in a large tank, 10 liters of water, add 150 ml of 70% acetic acid or 5 sachets with 20 ml citric acid.Place the baked-on cookware that you are going to clean, put the container on fire and high temperature, and the solution was brought to a boil is not necessary to leave the dishes for 12-15 hours, then rinse under running water and detergent for dishes.If fumes from the first shot is not fully repeat the procedure.Such a process helps to make all the pots and pans perfectly clean, from the burning will be over.