you need
  • - turpentine;
  • - gasoline;
  • - soap solution;
  • - tooth powder (talc);
  • - chalk (powder);
  • - ammonia;
  • - citric acid;
  • - a solution of vinegar (9%);
  • - water;
  • - scrubbing;
  • - iron.
Guide
1
Heavy pollution on the fur coat can be removed using a special blend.For its preparation you will need 1 teaspoon of turpentine, 1 teaspoon of gasoline.These components mix well and apply directly on the stain.After 15-20 minutes, remove the remnants of funds using a stiff brush dipped in soapy water.At the same time try to prevent the ingress of funds for lining jackets .After removing stains, hang to dry the product in a well-ventilated room or on the balcony (loggia).
2
fresh stains on the fur coat can be removed with tooth powder or talc.They can be purch
ased in a specialty store or pharmacy.Sprinkle talcum powder contaminated area (tooth powder) and leave for the night.In the morning shake off the remnants of funds stiff brush.If the product you want to clean up in a short period of time, then sprinkle the stain powder, put on the front and reverse side jackets cloth (paper) and iron contaminated area to warm up to 180-200 degrees iron.
3
with light jackets spot can be derived with the help of chalk powder and gasoline.To this mix these components in a ratio of 2: 1.The resulting mush apply to the contaminated area.After 3-4 hours, remove the remaining funds stiff brush.If necessary, repeat the procedure.
4
Ammonia also effectively removes various kinds of dirt.Dilute it 1:10 with warm water, and the wash solution the desired area of ​​the product.
5
also remove the stain with a fur jacket possible using citric acid or vinegar solution (9%).To this dilute 1 teaspoon means in 1/2 glass of warm water.The resulting solution wash the contaminated area.If necessary, repeat the procedure, soak the stain for 20-30 minutes in the vehicle.