Remember, year issue, as a rule, determined on VIN, which meets certain international standards.But most number body you can not determine the date of the direct production of machines, because on it you can just find the model year .
Keep in mind that every automaker determines the number solely on their own, so the international standard for VIN is only indicative.The plate number is located under the hood of the car.If the pointer is not available, then pay attention to the figure on the cross member under the front bumper or frame.Sometimes the number can be found on the top edge of the open hood.
Pay attention to the tenth position VIN, and it represents the model year .If the car was released in 1980 or 2010 at the year, it will be the letter A, which corresponds to the 10th number .If cars in 1987 year and it will be listed H, but the year 1998 be under the letter J. The car, released in 1992, it comes with N, in 1993 year have - P, and in 94 - R. Car 1997 year and release is indicated in VIN-code letter V. Then, since 2000, the numbering will be used and, accordingly, if the machine was released in 2009 year have, then it will figure 9. Then comes again the use of the Latin alphabet onlywithout the use of the following letters: Y, O, Q, U and Z.
Use the special online services on the Internet for decoding VIN code, if you are still not able to deal with th year of release.Also, do not trust just number body, since it does not contain the complete data on the release of the machine.Therefore, in addition to checking VIN and see and accompanying documents, because they often specified the exact date of release of the car .
Pay attention to electric wires and cables under the hood, because they, too, carry the correct information.Also look at the windshield, where the last two digits of the year are om its manufacture, which should always match the th year of manufacture of the machine itself.Of course, if it is not changed.
Tip 2: How to determine the number of the body of model year
Moment release vehicle shall be the date of manufacture.It should be indicated in the accompanying documents.In the absence of documentary evidence of this date can be determined by using a number body .
in accordance with a uniform numbering system of international road transport identification number (VIN) and is a combination of 17 letters and numeric codes.They are assigned to each individual vehicle.VIN must be specified in the data sheet.It is usually stamped on the right side of the vehicle as possible and necessarily the front part permanent.
identification number consists of three parts.The first is a manufacturer code.It consists of several characters: the first is a geographical area, the second - to third - a specific manufacturer.The second part consists of six characters which are intended to describe the behavior of the vehicle.The third consists of eight characters.The last four of which must be numerals.
These numbers are applied to the one-piece components body or chassis and special license plates.VIN to be written in either one line or two lines.A must is the lack of space between charset value.Moreover, its members should not be separated.It has an alphanumeric structure exception - the last four positions.For preparation uses the following Arabic numerals and letters 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F, G, H, J, K,L, M, N, P, R, S, T, U, V, W, X, Y, Z.
According to international standard ISO 3779-1983 year issue should be placedat the tenth position in the identification number of the body .In some exceptional cases, it may be indicated, for example, at 11 positions.
repetition denote the year of release carried out by manufacturers with a periodicity of 30 years.If you see the designation W, the car is 1998;And if - the machine was released in 1980 or 2010, the .The numbers 1 to 9 are inherent in the time period 2001-2009 and 1971-1979, respectively.Then there is the repetition of the Latin alphabet.
It should be borne in mind that the firm's VIN number show the so-called model year, which in most cases does not coincide with the calendar.This is due to the fact that the standard recommends starting release new lineup from July 1.Knowing these two indicators, it is possible to determine the age of the car up to six months.
determine the year of manufacture can also stamp on the back of the glass or mirrors, seat belts on labels, stickers in the cabin on the seats, under the hood with a service station.
- model year Japanese cars