you need
  • - repair kit car interior compartment;
  • - thin fabric;
  • - scalpel.
Guide
1
for restoration of special seats need a repair kit Interior Motor Show.Choose the desired set depending on the type of material covering seat .This can be a repair kit leather, velor or fabric seat.
2
If the damage was formed as a result of burn-through by pulling the material around the hole, gently flatten or cut off with a scalpel these shrunken areas.Despite the fact that the hole becomes larger in this state, it is better to give in recovery.
3
From inside the hole Con special reinforced mesh, included in a restoration kit.Putting, progladte Teflon utjuzhkom it at a temperature not exceeding 125 degrees, otherwise, the grid may melt.Between her and ironing sure to route the thin flap of t
issue.For reliable bonding mesh, iron is necessary for 10 - 15 minutes.
4
After installing the gasket in the form of reinforced mesh, apply to the area within the opening part of the repair kit.As a rule, it is a powder is melted by heat treatment, and filling a hole.
5
poured on the damaged area of ​​the powder layer, cover it with a special Teflon coating and iron utjuzhkom 10 - 50 seconds.Allow to cool the molten composition.To speed up this process, apply a cooling bag.
6
While the composition cools, prepare the mixture, allow to recreate the texture corresponding to the color-damaged area.Take the repair kit from a special two-component, and squeeze in equal amounts on a spatula.Mix and apply on the surface of a nearby seat.For five minutes the coating has hardened, and on its reverse side will be the smallest figure - an impression.
7
Finished copy textures "Printed" in the treated area.To do this, apply to the affected area of ​​the second layer of powder on top of it - mold and iron all this ironing, putting the Teflon gasket.
8
With color fans pick the color best suited to the surface to be repaired.Opposite colors have a special code that must be found in the directory with a precise description of the method of preparation shade.
9
's instruction, prepare the paint, taking the necessary components of the kit.Special paint gun, apply to the repair area and allow to dry for 10 - 15 minutes.If the surface is fleecy seat - in the tone of it will need to pick up lint contained in the kit in jars.