Tip 1: How to speed stick

Storage Devices in the modern world are constantly improved: the dimensions become smaller, and the speed is getting higher.We have abandoned the floppy disks gradually passes era of CD and DVD, the relevance in terms of the information carrier retains only well-known "flash card".Each new model is less emche and speed, but it is "like new" always more expensive than their "big brothers".Does it make sense to pay more?Not always, for example, you can increase the speed of their own.
you need
  • computer, flash drive, minimum knowledge of computer and operating system WINDOWS
Guide
1
First of all, make sure your computer and the operating system on it in the normaloperating condition as to 90% of the speed problems stick can be associated with it.If necessary, reinstall the system, pay attention to the installation of drivers for the USB 2.0, because they are also dependent on the correct operation of the external storage devices.Then enter in the BIOS, in the item «USB Configuration», and
activate the item «USB 2.0 Controller», selecting «enabled», appears in «USB 2.0 Controller Mode» select «FullSpeed» (or «HiSpeed»).Flash card will work as fast as possible.
2
Make sure the computer resources are not working full load, as it also affects the speed of the USB flash drive, by pressing a combination of keys: ctrl + alt + del and see evidence CPU and RAM.It is possible that your computer's resources, "eats" the work of anti-virus, and also checks any operation carried out with the stick, whether recording or playback, respectively, slowing its speed, or some other program or virus.
3
If computer hardware and software, all right, rule out the possibility of possible defects filesystem stick to it and check it for errors: go to "properties of the stick," tab "Tools" and click onbutton "validate", tick off available for this item in the opened window.Also try to format the USB flash drive in standard mode by clicking on it right mouse button and selecting the appropriate menu item.
4
change the file system on the USB drive NTFS, the most reliable and fault-tolerant file system today, sometimes it increases the speed of a stick especially large capacity when working with large files.When you increase the size of the cluster is formatted flash memory, as the larger the cluster size, the higher the speed of read / write when working with flash memory.To do this, find the tab "perform" in the "Start" menu, enter «cmd», in the open window command prompt, enter through the gap: Format X: / FS: Y / A: Z (where «X» - that drive "Y »- File System: FAT, FAT32, NTFS,« Z »- the cluster size).Instead, type the volume label X disk (G, F, etc.) instead of the «F» write the file system (FAT, FAT32, NTFS), and the place of Z dimension the cluster (the default is 4K, the highest possible 64K.

Tip 2: How to increase the speed of the stick

desire to increase speed work removable USB-drive course to any user, often used these devices. There are several suggestions on how to solve the problem.
How to increase the speed of the stick
Guide
1
to reboot your computer system, and use the right function key to enter the BIOS Setup. Authorize the operation, entering the value of the administrator password in the appropriate field query window system and gotab Advanced.
2
Point to USB Configuration and find the line with the value of USB 2.0 Controller Mode.Use the function key Enter and change the option HiSpeed ​​480 Mbps using the arrow keys.
3
Return to the main screen of the BIOS Setup Utility using functional Esc key and save your changes by pressing F10.Confirm your selection by pressing the OK button, and authorize the use changes, pressing Enter.Wait until the computer is restarted.
4
Make sure that you have the latest service pack for OC Windows 7, is available on the official website of Microsoft, and bring up the main menu system by pressing the "Start" button to make the necessary changes in the recording systemRegistry.Go to dialogue "Run" and enter regedit in the value of the string "Open."
5
Confirm the launch of the utility "Registry Editor", clicking OK, and then expand the branch HKEY_LOCAL_MACHINESystemCurrentControlSetControlusbstor.Create it with the name of a new sub VVVVPPPP and call its context menu by right-clicking.Point to "New" and select the "Parameter DWORD».
6
Assign key name created MaximumTransferLength and open it by double-clicking.Enter a value in the appropriate field 2097120 opened window "Edit DWORD» and confirm by pressing OK.Save your changes and reboot the computer to apply the changes saved.
Sources:
  • Acceleration speed data transmission USB-drives
  • accelerate work stick
Note
author assumes no responsibility for the consequencesAction recommended in the article and it does not guarantee the absence of errors and false information.
Sources:
  • check speed stick

0
0